[lkml]   [2018]   [Jan]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH 4.9 27/75] net: igmp: Use correct source address on IGMPv3 reports
On Tue, Jan 16, 2018 at 1:18 AM, Sebastian Gottschall
<> wrote:
>> According to my understanding of igmpv3_newpack(), the destination
>> address should always be IGMPV3_ALL_MCR = That is what I
>> see in my testing.
>> However, your packet trace says I don't know how the
>> code that we touched would be generating an IGMPv2 packet with that
>> destination address.
> easy answer from wikipedia. 224.0.x.x is not the only multicast block

AFAICT the code that was changed by this patch should not have
anything to do with other multicast blocks. It generates an IGMPv3
report with destination address So it would be useful to
get more information on how exactly it is causing a failure, so we can
find the root cause.

>> Would it be possible to get a stack trace for the case where the
>> source address is being cleared to in your configuration?
> you mean something like dumpstack and watching the flood comes over me?

I would just add something like this into my local tree for testing:

WARN_ON_ONCE(pip->saddr == htonl(INADDR_ANY));

 \ /
  Last update: 2018-01-16 16:32    [W:0.098 / U:0.360 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site