[lkml]   [2018]   [Jan]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH 3/4] ASoC: codecs: tas5720: add TAS5722 specific volume control
On Mon, Jan 15, 2018 at 08:50:09AM -0600, Andrew F. Davis wrote:
> On 12/12/2017 06:01 AM, Mark Brown wrote:
> > On Mon, Dec 11, 2017 at 01:01:56PM -0600, Andrew F. Davis wrote:

> >> The TAS5722 supports modifying volume in 0.25dB steps (as opposed to 0.5dB
> >> steps on the TAS5720). Introduce a custom mixer control that allows taking
> >> advantage of this finer output volume granularity.

> > Don't do this, it's just making things more complicated. Instead do
> > what other drivers do and register different sets of controls depending
> > on which part you're working with. The normal thing is to have a big
> > table for all the shared controls that are the same on all variants then
> > register additional tables during probe with those that vary for the
> > individul devices.

> That is what we are doing here, the reason for the custom mixer control
> is that the controlled bits span two registers in a odd way that is not
> supported by the standard handlers.

That's not clear from the commit message, it sounds like you're
introducing an an extra control rather than replacing the one that's
currently there.

> > As ever all volume controls should end in Volume (like the immediately
> > adjacent control does).

> This was done so this table exactly matches the existing table. If you
> would like me to change this then I can, and can do it for the other
> table as well, up to you.

Of course fixes for bugs in existing code are welcome.
[unhandled content-type:application/pgp-signature]
 \ /
  Last update: 2018-01-15 17:41    [W:0.062 / U:0.688 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site