[lkml]   [2017]   [Sep]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH v2 0/2] mtd: nand: wait for tWHR, and fix the setup_data_interface of Denali
2017-09-29 21:26 GMT+09:00 Boris Brezillon <>:
> On Fri, 29 Sep 2017 19:38:38 +0900
> Masahiro Yamada <> wrote:
>> 1/2 : add NAND_WAIT_TWHR and nand_whr_delay().
>> You can set this new flag if you want nand_command(_lp)
>> to insert tWHR delay where needed.
>> 2/2 : Fix Denali setup_data_interface.
>> Boris' suggestion in v1 was a good reminder that
>> made me realize tCCS was missing in the driver. Fix it now.
>> Changes in v2:
>> - Add nand_whr_delay() helper
>> Wait for tWHR only for drivers that explicitly set NAND_WAIT_TWHR flag
>> - newly added
>> Masahiro Yamada (2):
>> mtd: nand: wait for tWHR after NAND_CMD_STATUS / NAND_CMD_READID
> Hm, I thought you were introducing this to then use it in the denali
> driver. Sorry, but I don't want to apply something that nobody needs.
> If someone ever complains about a missing delay I'll point him to your
> patch, but until then I'll keep the core unchanged.

At first, I thought this was necessary for me,
but I realized it was my misunderstanding.

Please let me explain one more.

See commit 3158fa0e739615769cc047d2428f30f4c3b6640e.

Prior to that commit, READID waited for #R/B transition,
it was wrong, so I fixed it.

However, it dropped the delay completely.
If somebody was implicitly relying on the delay of chip->dev_ready,
the first byte might be read out before the valid data
is available.

This was motivation of v1, where inserted ndelay(200)

>> mtd: nand: denali: fix setup_data_interface to meet tCCS delay
> This one is valid. I'll queue it to nand/next soon.

If you drop 1/2, please let me do v3.

V2 mentions NAND_WAIT_TWHR, this is strange.

Best Regards
Masahiro Yamada

 \ /
  Last update: 2017-09-29 16:07    [W:0.132 / U:0.744 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site