lkml.org 
[lkml]   [2017]   [Sep]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 6/6] dt-bindings: rtc: merge ds1339 in ds1307 documentation
Date
Now that there is documentation for the ds1307 and compatible RTCs, merge
the ds1339 documentation in it.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
.../devicetree/bindings/rtc/dallas,ds1339.txt | 18 ------------------
Documentation/devicetree/bindings/rtc/rtc-ds1307.txt | 8 ++++++++
2 files changed, 8 insertions(+), 18 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/rtc/dallas,ds1339.txt

diff --git a/Documentation/devicetree/bindings/rtc/dallas,ds1339.txt b/Documentation/devicetree/bindings/rtc/dallas,ds1339.txt
deleted file mode 100644
index 916f57601a8f..000000000000
--- a/Documentation/devicetree/bindings/rtc/dallas,ds1339.txt
+++ /dev/null
@@ -1,18 +0,0 @@
-* Dallas DS1339 I2C Serial Real-Time Clock
-
-Required properties:
-- compatible: Should contain "dallas,ds1339".
-- reg: I2C address for chip
-
-Optional properties:
-- trickle-resistor-ohms : Selected resistor for trickle charger
- Values usable for ds1339 are 250, 2000, 4000
- Should be given if trickle charger should be enabled
-- trickle-diode-disable : Do not use internal trickle charger diode
- Should be given if internal trickle charger diode should be disabled
-Example:
- ds1339: rtc@68 {
- compatible = "dallas,ds1339";
- trickle-resistor-ohms = <250>;
- reg = <0x68>;
- };
diff --git a/Documentation/devicetree/bindings/rtc/rtc-ds1307.txt b/Documentation/devicetree/bindings/rtc/rtc-ds1307.txt
index c010f18a85a0..d28d6e7f6ae8 100644
--- a/Documentation/devicetree/bindings/rtc/rtc-ds1307.txt
+++ b/Documentation/devicetree/bindings/rtc/rtc-ds1307.txt
@@ -26,6 +26,13 @@ Optional properties:
- clock-output-names: From common clock binding to override the default output
clock name
- wakeup-source: Enables wake up of host system on alarm
+- trickle-resistor-ohms : ds1339, ds1340 and ds 1388 only
+ Selected resistor for trickle charger
+ Possible values are 250, 2000, 4000
+ Should be given if trickle charger should be enabled
+- trickle-diode-disable : ds1339, ds1340 and ds 1388 only
+ Do not use internal trickle charger diode
+ Should be given if internal trickle charger diode should be disabled

Example:
rtc1: ds1339@68 {
@@ -33,4 +40,5 @@ Example:
reg = <0x68>;
interrupt-parent = <&gpio4>;
interrupts = <20 0>;
+ trickle-resistor-ohms = <250>;
};
--
2.14.2
\
 
 \ /
  Last update: 2017-09-27 16:06    [W:0.038 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site