lkml.org 
[lkml]   [2017]   [Sep]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v1 3/5] dt-bindings: Add DT bindings for NVIDIA Tegra AHB DMA controller
From
Date

On 27/09/17 13:12, Dmitry Osipenko wrote:
> On 27.09.2017 11:34, Jon Hunter wrote:
>>
>> On 27/09/17 02:57, Dmitry Osipenko wrote:
>>> On 26.09.2017 17:50, Jon Hunter wrote:
>>>>
>>>> On 26/09/17 00:22, Dmitry Osipenko wrote:
>>>>> Document DT bindings for NVIDIA Tegra AHB DMA controller that presents
>>>>> on Tegra20/30 SoC's.
>>>>>
>>>>> Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
>>>>> ---
>>>>> .../bindings/dma/nvidia,tegra20-ahbdma.txt | 23 ++++++++++++++++++++++
>>>>> 1 file changed, 23 insertions(+)
>>>>> create mode 100644 Documentation/devicetree/bindings/dma/nvidia,tegra20-ahbdma.txt
>>>>>
>>>>> diff --git a/Documentation/devicetree/bindings/dma/nvidia,tegra20-ahbdma.txt b/Documentation/devicetree/bindings/dma/nvidia,tegra20-ahbdma.txt
>>>>> new file mode 100644
>>>>> index 000000000000..2af9aa76ae11
>>>>> --- /dev/null
>>>>> +++ b/Documentation/devicetree/bindings/dma/nvidia,tegra20-ahbdma.txt
>>>>> @@ -0,0 +1,23 @@
>>>>> +* NVIDIA Tegra AHB DMA controller
>>>>> +
>>>>> +Required properties:
>>>>> +- compatible: Must be "nvidia,tegra20-ahbdma"
>>>>> +- reg: Should contain registers base address and length.
>>>>> +- interrupts: Should contain one entry, DMA controller interrupt.
>>>>> +- clocks: Should contain one entry, DMA controller clock.
>>>>> +- resets : Should contain one entry, DMA controller reset.
>>>>> +- #dma-cells: Should be <1>. The cell represents DMA request select value
>>>>> + for the peripheral. For more details consult the Tegra TRM's
>>>>> + documentation, in particular AHB DMA channel control register
>>>>> + REQ_SEL field.
>>>>
>>>> What about the TRIG_SEL field? Do we need to handle this here as well?
>>>>
>>>
>>> Actually, DMA transfer trigger isn't related a hardware description. It's up to
>>> software to decide what trigger to select. So it shouldn't be in the binding.
>>
>> I think it could be, if say a board wanted a GPIO to trigger a transfer.
>>
>
> GPIO isn't a very good example, there is no "GPIO" trigger. To me all triggers
> are software-defined, so that software could create transfer chains.

TRM shows the following in the APBDMA_TRIG_REG_0 ...

"XRQ_A: XRQ.A (GPIOA) (Hardware initiated DMA request)"

Jon

--
nvpublic

\
 
 \ /
  Last update: 2017-09-27 15:46    [W:0.172 / U:0.148 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site