lkml.org 
[lkml]   [2017]   [Sep]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] regulator: lp873x: Update the enable mask for LDOs and BUCKs
Date
The reset value of the EN_PIN_CTRL bit fields of LDOs and BUCKs
need not be set correctly. Hence update the enable mask to include
the EN_PIN_CTRL bit. While enabling this should be set to 1 so
that all the regulators are tied to EN pin.

Signed-off-by: Keerthy <j-keerthy@ti.com>
---
drivers/regulator/lp873x-regulator.c | 19 ++++++++++---------
include/linux/mfd/lp873x.h | 4 ++++
2 files changed, 14 insertions(+), 9 deletions(-)

diff --git a/drivers/regulator/lp873x-regulator.c b/drivers/regulator/lp873x-regulator.c
index 70e3df6..77bea82 100644
--- a/drivers/regulator/lp873x-regulator.c
+++ b/drivers/regulator/lp873x-regulator.c
@@ -20,7 +20,7 @@
#include <linux/mfd/lp873x.h>

#define LP873X_REGULATOR(_name, _id, _of, _ops, _n, _vr, _vm, _er, _em, \
- _delay, _lr, _cr) \
+ _dv, _delay, _lr, _cr) \
[_id] = { \
.desc = { \
.name = _name, \
@@ -36,6 +36,7 @@
.vsel_mask = _vm, \
.enable_reg = _er, \
.enable_mask = _em, \
+ .disable_val = _dv, \
.ramp_delay = _delay, \
.linear_ranges = _lr, \
.n_linear_ranges = ARRAY_SIZE(_lr), \
@@ -175,21 +176,21 @@ static int lp873x_buck_get_current_limit(struct regulator_dev *rdev)
LP873X_REGULATOR("BUCK0", LP873X_BUCK_0, "buck0", lp873x_buck01_ops,
256, LP873X_REG_BUCK0_VOUT,
LP873X_BUCK0_VOUT_BUCK0_VSET, LP873X_REG_BUCK0_CTRL_1,
- LP873X_BUCK0_CTRL_1_BUCK0_EN, 10000,
- buck0_buck1_ranges, LP873X_REG_BUCK0_CTRL_2),
+ LP873X_BUCK_ENABLE_MASK, LP873X_BUCK_DISABLE_VAL,
+ 10000, buck0_buck1_ranges, LP873X_REG_BUCK0_CTRL_2),
LP873X_REGULATOR("BUCK1", LP873X_BUCK_1, "buck1", lp873x_buck01_ops,
256, LP873X_REG_BUCK1_VOUT,
LP873X_BUCK1_VOUT_BUCK1_VSET, LP873X_REG_BUCK1_CTRL_1,
- LP873X_BUCK1_CTRL_1_BUCK1_EN, 10000,
- buck0_buck1_ranges, LP873X_REG_BUCK1_CTRL_2),
+ LP873X_BUCK_ENABLE_MASK, LP873X_BUCK_DISABLE_VAL,
+ 10000, buck0_buck1_ranges, LP873X_REG_BUCK1_CTRL_2),
LP873X_REGULATOR("LDO0", LP873X_LDO_0, "ldo0", lp873x_ldo01_ops, 26,
LP873X_REG_LDO0_VOUT, LP873X_LDO0_VOUT_LDO0_VSET,
- LP873X_REG_LDO0_CTRL,
- LP873X_LDO0_CTRL_LDO0_EN, 0, ldo0_ldo1_ranges, 0xFF),
+ LP873X_REG_LDO0_CTRL, LP873X_LDO_ENABLE_MASK,
+ LP873X_LDO_DISABLE_VAL, 0, ldo0_ldo1_ranges, 0xFF),
LP873X_REGULATOR("LDO1", LP873X_LDO_1, "ldo1", lp873x_ldo01_ops, 26,
LP873X_REG_LDO1_VOUT, LP873X_LDO1_VOUT_LDO1_VSET,
- LP873X_REG_LDO1_CTRL,
- LP873X_LDO1_CTRL_LDO1_EN, 0, ldo0_ldo1_ranges, 0xFF),
+ LP873X_REG_LDO1_CTRL, LP873X_LDO_ENABLE_MASK,
+ LP873X_LDO_DISABLE_VAL, 0, ldo0_ldo1_ranges, 0xFF),
};

static int lp873x_regulator_probe(struct platform_device *pdev)
diff --git a/include/linux/mfd/lp873x.h b/include/linux/mfd/lp873x.h
index edbec83..53888d4 100644
--- a/include/linux/mfd/lp873x.h
+++ b/include/linux/mfd/lp873x.h
@@ -77,6 +77,8 @@
#define LP873X_BUCK0_CTRL_1_BUCK0_RDIS_EN BIT(2)
#define LP873X_BUCK0_CTRL_1_BUCK0_EN_PIN_CTRL BIT(1)
#define LP873X_BUCK0_CTRL_1_BUCK0_EN BIT(0)
+#define LP873X_BUCK_ENABLE_MASK (BIT(0) | BIT(1))
+#define LP873X_BUCK_DISABLE_VAL BIT(1)

#define LP873X_BUCK0_CTRL_2_BUCK0_ILIM 0x38
#define LP873X_BUCK0_CTRL_2_BUCK0_SLEW_RATE 0x07
@@ -96,6 +98,8 @@
#define LP873X_LDO0_CTRL_LDO0_RDIS_EN BIT(2)
#define LP873X_LDO0_CTRL_LDO0_EN_PIN_CTRL BIT(1)
#define LP873X_LDO0_CTRL_LDO0_EN BIT(0)
+#define LP873X_LDO_ENABLE_MASK (BIT(0) | BIT(1))
+#define LP873X_LDO_DISABLE_VAL BIT(1)

#define LP873X_LDO1_CTRL_LDO1_RDIS_EN BIT(2)
#define LP873X_LDO1_CTRL_LDO1_EN_PIN_CTRL BIT(1)
--
1.9.1
\
 
 \ /
  Last update: 2017-09-27 14:26    [W:0.164 / U:1.352 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site