lkml.org 
[lkml]   [2017]   [Sep]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH v2] PCIe AER: report uncorrectable errors only to the functions that logged the errors
On Wed, Sep 06, 2017 at 10:56:42AM +0000, Gabriele Paoloni wrote:
> Hi Bjorn
>
> > -----Original Message-----
> > From: Bjorn Helgaas [mailto:helgaas@kernel.org]
> > Sent: 02 September 2017 18:33
> > To: Gabriele Paoloni
> > Cc: Linuxarm; liudongdong (C); linux-pci@vger.kernel.org; linux-
> > kernel@vger.kernel.org
> > Subject: Re: [PATCH v2] PCIe AER: report uncorrectable errors only to
> > the functions that logged the errors
> >
> > On Fri, Sep 01, 2017 at 11:39:35AM +0000, Gabriele Paoloni wrote:
> > > Hi Bjorn
> > >
> > > Many thanks for looking at this
> > >
> > > > -----Original Message-----
> > > > From: Bjorn Helgaas [mailto:helgaas@kernel.org]
> > > > Sent: 01 September 2017 05:43
> > > > To: Gabriele Paoloni
> > > > Cc: Linuxarm; liudongdong (C); linux-pci@vger.kernel.org; linux-
> > > > kernel@vger.kernel.org
> > > > Subject: Re: [PATCH v2] PCIe AER: report uncorrectable errors only
> > to
> > > > the functions that logged the errors
> > > >
> > > > On Thu, Aug 31, 2017 at 03:03:44PM -0500, Bjorn Helgaas wrote:
> > > > > On Fri, Aug 18, 2017 at 12:02:21PM +0100, Gabriele Paoloni wrote:
> > > > > > Currently if an uncorrectable error is reported by an EP the
> > AER
> > > > > > driver walks over all the devices connected to the upstream
> > port
> > > > > > bus and in turns call the report_error_detected() callback.
> > > > > > If any of the devices connected to the bus does not implement
> > > > > > dev->driver->err_handler->error_detected() do_recovery() will
> > fail
> > > > > > leaving all the bus hierarchy devices unrecovered.
> > > > > >
> > > > > > However for non fatal errors the PCIe link should not be
> > considered
> > > > > > compromised, therefore it makes sense to report the error only
> > to
> > > > > > all the functions that logged an error.
> > > > >
> > > > > Can you include a pointer to the relevant part of the spec here?
> > >
> > > Sure
> > > According to section "6.2.2.2.2. Non-Fatal Errors"
> > > << Non-fatal errors are uncorrectable errors which cause a particular
> > > transaction to be unreliable but the Link is otherwise fully
> > functional.
> > > Isolating Non-fatal from Fatal errors provides Requester/Receiver
> > logic
> > > in a device or system management software the opportunity to recover
> > > from the error without resetting the components on the Link and
> > > disturbing other transactions in progress. Devices not associated
> > with
> > > the transaction in error are not impacted by the error.>>
> > >
> > > I will add it to the commit msg:
> > >
> > > >
> > > > Also, I forgot to ask: can you outline the problem this fixes? I'm
> > > > curious about why this hasn't been an issue in the past. My guess
> > is
> > > > there's something new about your configuration, and the config and
> > the
> > > > symptoms might help connect this fix to similar problems.
> > >
> > > I already replied about this in the previous patch...
> > > << In Hi1620 we have some integrated controllers that appear as PCIe
> > EPs
> > > under the same bus. Some of these controllers (e.g. the SATA
> > > controller) are missing the err_handler callbacks.
> > >
> > > If one device reports a non-fatal uncorrectable error with the
> > current
> > > AER core code the callbacks for all the devices under the same bus
> > will
> > > be called and, if any of the devices is missing the callback all the
> > > devices in the subtree are left in error state without recovery...
> > > This patch is needed to sort out a situation like this one.>>
> > >
> > > Should I add this to the commit msg?
> >
> > Thanks for the reminder. I thought I remembered some details but
> > hadn't dug them out again. Yes, I was hoping for something we could
> > include in the commit message. I'm still not sure what specifically
> > is *new* about this situation. Maybe the particular mix of functions
> > in a multi-function device? Maybe the fact that you're seeing more
> > AER errors than before (or maybe just doing more testing?)
>
> Hi Bjorn as I said here we have some integrated controllers that appear
> as PCIe EPs under the same bus. Usually PCIe is p2p (no more that 1
> device per bus), but in our SoC we have different devices under the same
> bus (not MF devices):
>
> RC---bus0---|-SAS ctrl
> |
> |-SATA ctrl
> |
> |-XGE ctrl
>
> Since this is unusual this is maybe the reason why this has not been
> seen yet elsewhere...
>
> >
> > Since this is actually a bug fix, this might be a good opportunity to
> > open a bugzilla for it. Then we have a place to attach the complete
> > "lspci -vv" output, dmesg, etc., that are of interest but too much for
> > the commit message.
>
> Sure we can do this and add the bugzilla link in the commit msg
>
> >
> > > > > > This patch implements this new behaviour for non fatal errors.
> > > > > >
> > > > > > Signed-off-by: Gabriele Paoloni <gabriele.paoloni@huawei.com>
> > > > > > Signed-off-by: Dongdong Liu <liudongdong3@huawei.com>
> > > > > > ---
> > > > > > Changes from v1:
> > > > > > - now errors are reported only to the fucntions that logged
> > the
> > > > error
> > > > > > instead of all the functions in the same device.
> > > > > > - the patch subject has changed to match the new
> > implementation
> > > > > > ---
> > > > > > drivers/pci/pcie/aer/aerdrv_core.c | 9 ++++++++-
> > > > > > 1 file changed, 8 insertions(+), 1 deletion(-)
> > > > > >
> > > > > > diff --git a/drivers/pci/pcie/aer/aerdrv_core.c
> > > > b/drivers/pci/pcie/aer/aerdrv_core.c
> > > > > > index b1303b3..057465ad 100644
> > > > > > --- a/drivers/pci/pcie/aer/aerdrv_core.c
> > > > > > +++ b/drivers/pci/pcie/aer/aerdrv_core.c
> > > > > > @@ -390,7 +390,14 @@ static pci_ers_result_t
> > > > broadcast_error_message(struct pci_dev *dev,
> > > > > > * If the error is reported by an end point, we think
> > this
> > > > > > * error is related to the upstream link of the end
> > point.
> > > > > > */
> > > > > > - pci_walk_bus(dev->bus, cb, &result_data);
> > > > > > + if (state == pci_channel_io_normal)
> > > > > > + /*
> > > > > > + * the error is non fatal so the bus is ok,
> > just
> > > > invoke
> > > > > > + * the callback for the function that logged
> > the
> > > > error.
> > > > > > + */
> > > > > > + cb(dev, &result_data);
> > > > > > + else
> > > > > > + pci_walk_bus(dev->bus, cb, &result_data);
> > > > >
> > > > > I think the concept of this change makes sense, but I don't like
> > the
> > > > > implicit connection of PCI_ERR_ROOT_UNCOR_RCV -> AER_NONFATAL ->
> > > > > pci_channel_io_normal. That makes it harder than it should be to
> > > > read
> > > > > the code.
> > > > >
> > > > > What would you think of changing the signature of do_recovery()
> > and
> > > > > broadcast_error_message() so they take the struct aer_err_info
> > > > pointer
> > > > > instead of just the severity and pci_channel_state? Then we
> > could
> > > > > check directly for AER_NONFATAL here.
> > >
> > > I think the main issue of this approach is
> > > aer_recover_work_func()->do_recovery()
> > > If we modify the signature of do_recovery() we also need to modify
> > > struct aer_recover_entry to embed aer_err_info sub struct (and anyway
> > > so far there is no hook to aer_err_info in ghes.c...so it seems to
> > > me like unfeasible...)
> > >
> > > I think we can either add a severity field to
> > broadcast_error_message()
> > > or move
> > >
> > > enum pci_channel_state state;
> > >
> > > if (severity == AER_FATAL)
> > > state = pci_channel_io_frozen;
> > > else
> > > state = pci_channel_io_normal;
> > >
> > > inside broadcast_error_message()
> > >
> > > In both cases we make the code more readable but we add redundancy...
> > > Thoughts?
> >
> > Hmmm, it's not as simple to solve as I hoped.
> >
> > The "native" Linux AER driver reads registers directly from the AER
> > capability, produces logs, and does some recovery.
> >
> > From 100 miles away, APEI is basically a way for the platform (i.e.,
> > firmware or manageability software) to insert itself in the middle:
> > *it* reads the AER registers, does whatever it wants to do (e.g.,
> > OS-independent logging), and then passes a copy of the AER capability
> > (and the PCIe capability for good measure) on to the OS via APEI.
> >
> > The Linux APEI code then stuffs that AER info into the native Linux
> > AER path where we do our own recovery.
> >
> > So we basically have two entry points to the Linux AER code: (1) the
> > get_device_error_info() path that reads the AER registers directly,
> > and (2) the APEI path that gets the AER register info from the
> > firmware.
> >
> > In my mind, these paths ought to be far more unified than they are.
> > The transition from APEI to the native Linux AER code throws away
> > almost all the information we got from the platform:
> > aer_recover_work_func() in the APEI path gets a copy of the AER
> > capability, but all it passes to do_recovery() in the native AER code
> > is "severity" -- a single int.
> >
> > I think we should revamp the native AER code so it collects the AER
> > register info a little higher up, maybe in aer_isr_one_error() (it's
> > kind of stupid that aer_process_err_devices() currently reads the AER
> > registers *twice*).
> >
> > Then we could make the APEI code copy the information we care about
> > from the CPER into a struct aer_err_info, then stuff it into
> > aer_process_err_devices(). That would have the nice side-effect of
> > using exactly the same logging code for both paths (currently the APEI
> > path uses cper_print_aer(), while the native path uses
> > aer_print_error()).
> >
> > This is a lot of work.
>
> I agree (on what to do and, unfortunately, on a lot of work :) ).
> However given that this patch fixes a bug I would ask if we can first
> accept this patch first and then proceed with the rework...what do
> you think?

Yes, I think we can do that. Can you repost this with a revised
changelog that references the bugzilla?

Bjorn

\
 
 \ /
  Last update: 2017-09-25 20:35    [W:0.116 / U:2.960 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site