[lkml]   [2017]   [Sep]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Patch in this message
Subject[RFC PATCH v5 3/6] i2c: add docs to clarify DMA handling
Signed-off-by: Wolfram Sang <>
Documentation/i2c/DMA-considerations | 58 ++++++++++++++++++++++++++++++++++++
1 file changed, 58 insertions(+)
create mode 100644 Documentation/i2c/DMA-considerations

diff --git a/Documentation/i2c/DMA-considerations b/Documentation/i2c/DMA-considerations
new file mode 100644
index 00000000000000..5a63355c6a9b6f
--- /dev/null
+++ b/Documentation/i2c/DMA-considerations
@@ -0,0 +1,58 @@
+Linux I2C and DMA
+Given that I2C is a low-speed bus where largely small messages are transferred,
+it is not considered a prime user of DMA access. At this time of writing, only
+10% of I2C bus master drivers have DMA support implemented. And the vast
+majority of transactions are so small that setting up DMA for it will likely
+add more overhead than a plain PIO transfer.
+Therefore, it is *not* mandatory that the buffer of an I2C message is DMA safe.
+It does not seem reasonable to apply additional burdens when the feature is so
+rarely used. However, it is recommended to use a DMA-safe buffer if your
+message size is likely applicable for DMA. Most drivers have this threshold
+around 8 bytes (as of today, this is mostly an educated guess, however). For
+any message of 16 byte or larger, it is probably a really good idea. Please
+note that other subsystems you use might add requirements. E.g., if your
+I2C bus master driver is using USB as a bridge, then you need to have DMA
+safe buffers always, because USB requires it.
+For clients, if you use a DMA safe buffer in i2c_msg, set the I2C_M_DMA_SAFE
+flag with it. Then, the I2C core and drivers know they can safely operate DMA
+on it. Note that using this flag is optional. I2C host drivers which are not
+updated to use this flag will work like before. And like before, they risk
+using an unsafe DMA buffer. To improve this situation, using I2C_M_DMA_SAFE in
+more and more clients and host drivers is the planned way forward. Note also
+that setting this flag makes only sense in kernel space. User space data is
+copied into kernel space anyhow. The I2C core makes sure the destination
+buffers in kernel space are always DMA capable.
+FIXME: Need to implement i2c_master_{send|receive}_dma and proper buffers for i2c_smbus_xfer_emulated.
+Drivers wishing to implement safe DMA can use helper functions from the I2C
+core. One gives you a DMA-safe buffer for a given i2c_msg as long as a certain
+threshold is met::
+ dma_buf = i2c_get_dma_safe_msg_buf(msg, threshold_in_byte);
+If a buffer is returned, it is either msg->buf for the I2C_M_DMA_SAFE case or a
+bounce buffer. But you don't need to care about that detail, just use the
+returned buffer. If NULL is returned, the threshold was not met or a bounce
+buffer could not be allocated. Fall back to PIO in that case.
+In any case, a buffer obtained from above needs to be released. It ensures data
+is copied back to the message and a potentially used bounce buffer is freed::
+ i2c_release_dma_safe_msg_buf(msg, dma_buf);
+The bounce buffer handling from the core is generic and simple. It will always
+allocate a new bounce buffer. If you want a more sophisticated handling (e.g.
+reusing pre-allocated buffers), you are free to implement your own.
+Please also check the in-kernel documentation for details. The i2c-sh_mobile
+driver can be used as a reference example how to use the above helpers.
+Final note: If you plan to use DMA with I2C (or with anything else, actually)
+make sure you have CONFIG_DMA_API_DEBUG enabled during development. It can help
+you find various issues which can be complex to debug otherwise.
 \ /
  Last update: 2017-09-20 21:02    [W:0.061 / U:1.544 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site