lkml.org 
[lkml]   [2017]   [Sep]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net-next] net: dsa: lan9303: Add adjust_link() method
Date
Make the driver react to device tree "fixed-link" declaration on CPU port.

- turn off autonegotiation
- force speed 10 or 100 mb/s
- force duplex mode

Signed-off-by: Egil Hjelmeland <privat@egil-hjelmeland.no>
---
drivers/net/dsa/lan9303-core.c | 40 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 40 insertions(+)

diff --git a/drivers/net/dsa/lan9303-core.c b/drivers/net/dsa/lan9303-core.c
index b471413d3df9..07355db2ad81 100644
--- a/drivers/net/dsa/lan9303-core.c
+++ b/drivers/net/dsa/lan9303-core.c
@@ -17,6 +17,7 @@
#include <linux/regmap.h>
#include <linux/mutex.h>
#include <linux/mii.h>
+#include <linux/phy.h>

#include "lan9303.h"

@@ -57,6 +58,7 @@
#define LAN9303_SWITCH_CSR_CMD_LANES (BIT(19) | BIT(18) | BIT(17) | BIT(16))
#define LAN9303_VIRT_PHY_BASE 0x70
#define LAN9303_VIRT_SPECIAL_CTRL 0x77
+#define LAN9303_VIRT_SPECIAL_TURBO BIT(10) /*Turbo MII Enable*/

/*13.4 Switch Fabric Control and Status Registers
* Accessed indirectly via SWITCH_CSR_CMD, SWITCH_CSR_DATA.
@@ -760,6 +762,43 @@ static int lan9303_phy_write(struct dsa_switch *ds, int phy, int regnum,
return chip->ops->phy_write(chip, phy, regnum, val);
}

+static void lan9303_adjust_link(struct dsa_switch *ds, int port,
+ struct phy_device *phydev)
+{
+ struct lan9303 *chip = ds->priv;
+ int ctl, res;
+
+ if (!phy_is_pseudo_fixed_link(phydev))
+ return;
+
+ ctl = lan9303_phy_read(ds, port, MII_BMCR);
+
+ ctl &= ~BMCR_ANENABLE;
+
+ if (phydev->speed == SPEED_100)
+ ctl |= BMCR_SPEED100;
+ else if (phydev->speed == SPEED_10)
+ ctl &= ~BMCR_SPEED100;
+ else
+ dev_err(ds->dev, "unsupported speed: %d\n", phydev->speed);
+
+ if (phydev->duplex == DUPLEX_FULL)
+ ctl |= BMCR_FULLDPLX;
+ else
+ ctl &= ~BMCR_FULLDPLX;
+
+ res = lan9303_phy_write(ds, port, MII_BMCR, ctl);
+
+ if (port == chip->phy_addr_sel_strap) {
+ /* Virtual Phy: Remove Turbo 200Mbit mode */
+ lan9303_read(chip->regmap, LAN9303_VIRT_SPECIAL_CTRL, &ctl);
+
+ ctl &= ~LAN9303_VIRT_SPECIAL_TURBO;
+ res = regmap_write(chip->regmap,
+ LAN9303_VIRT_SPECIAL_CTRL, ctl);
+ }
+}
+
static int lan9303_port_enable(struct dsa_switch *ds, int port,
struct phy_device *phy)
{
@@ -803,6 +842,7 @@ static const struct dsa_switch_ops lan9303_switch_ops = {
.get_strings = lan9303_get_strings,
.phy_read = lan9303_phy_read,
.phy_write = lan9303_phy_write,
+ .adjust_link = lan9303_adjust_link,
.get_ethtool_stats = lan9303_get_ethtool_stats,
.get_sset_count = lan9303_get_sset_count,
.port_enable = lan9303_port_enable,
--
2.11.0
\
 
 \ /
  Last update: 2017-09-19 10:10    [W:0.100 / U:0.188 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site