lkml.org 
[lkml]   [2017]   [Sep]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 1/2] ARM64: dts: meson-gxm: Add Vega S96 board
From
Date
On Tue, 2017-09-19 at 14:05 +0200, Neil Armstrong wrote:
> The Tronsmart Vega S96 is a TV box derived from Amlogic q200 reference design.
>
> Cc: support@tronsmart.com
> Signed-off-by: Oleg <balbes-150@yandex.ru>

Does Oleg have a surname ? :)

> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> ---
> arch/arm64/boot/dts/amlogic/Makefile | 1 +
> arch/arm64/boot/dts/amlogic/meson-gxm-vega-s96.dts | 39
> ++++++++++++++++++++++
> 2 files changed, 40 insertions(+)
> create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxm-vega-s96.dts
>
> diff --git a/arch/arm64/boot/dts/amlogic/Makefile
> b/arch/arm64/boot/dts/amlogic/Makefile
> index 7a9f48c..a6c4a06 100644
> --- a/arch/arm64/boot/dts/amlogic/Makefile
> +++ b/arch/arm64/boot/dts/amlogic/Makefile
> @@ -19,6 +19,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxm-nexbox-a1.dtb
> dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q200.dtb
> dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q201.dtb
> dtb-$(CONFIG_ARCH_MESON) += meson-gxm-rbox-pro.dtb
> +dtb-$(CONFIG_ARCH_MESON) += meson-gxm-vega-s96.dtb
>
> always := $(dtb-y)
> subdir-y := $(dts-dirs)
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-vega-s96.dts
> b/arch/arm64/boot/dts/amlogic/meson-gxm-vega-s96.dts
> new file mode 100644
> index 0000000..ba74240
> --- /dev/null
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-vega-s96.dts
> @@ -0,0 +1,39 @@
> +/*
> + * Copyright (c) 2017 BayLibre, SAS.
> + * Author: Neil Armstrong <narmstrong@baylibre.com>
> + * Copyright (c) 2017 Oleg <balbes-150@yandex.ru>
> + *
> + * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> + */
> +
> +/dts-v1/;
> +
> +#include "meson-gxm.dtsi"
> +#include "meson-gx-p23x-q20x.dtsi"
> +
> +/ {
> + compatible = "tronsmart,vega-s96", "amlogic,s912", "amlogic,meson-
> gxm";
> + model = "Tronsmart Vega S96";
> +
> +};
> +
> +&ethmac {
> + pinctrl-0 = <&eth_pins>;
> + pinctrl-names = "default";
> +
> + /* Select external PHY by default */
> + phy-handle = <&external_phy>;
> +
> + amlogic,tx-delay-ns = <2>;
> +
> + /* External PHY is in RGMII */
> + phy-mode = "rgmii";
> +};
> +
> +&external_mdio {
> + external_phy: ethernet-phy@0 {
> + compatible = "ethernet-phy-id001c.c916", "ethernet-phy-
> ieee802.3-c22";
> + reg = <0>;
> + max-speed = <1000>;
I don't think this max-speed property is necessary

> + };
> +};

\
 
 \ /
  Last update: 2017-09-19 17:02    [W:8.912 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site