lkml.org 
[lkml]   [2017]   [Aug]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 16/18] power: supply: bq24190_charger: Remove extcon handling
From
Date
Hi,

On 08-08-17 10:27, Liam Breck wrote:
> Hi Hans,
>
> On Sun, Aug 6, 2017 at 5:35 AM, Hans de Goede <hdegoede@redhat.com> wrote:
>> Now that drivers/i2c/busses/i2c-cht-wc.c uses
>> "input-current-limit-from-supplier" instead of "extcon-name" the last
>> user of the bq24190 extcon code is gone, remove it.
>>
>> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
>> ---
>> drivers/power/supply/bq24190_charger.c | 107 ---------------------------------
>> 1 file changed, 107 deletions(-)
>>
>> diff --git a/drivers/power/supply/bq24190_charger.c b/drivers/power/supply/bq24190_charger.c
>> index 1f6424f0772f..0376de6d8e70 100644
>> --- a/drivers/power/supply/bq24190_charger.c
>> +++ b/drivers/power/supply/bq24190_charger.c
>> @@ -11,7 +11,6 @@
>> #include <linux/module.h>
>> #include <linux/interrupt.h>
>> #include <linux/delay.h>
>> -#include <linux/extcon.h>
>> #include <linux/of_irq.h>
>> #include <linux/of_device.h>
>> #include <linux/pm_runtime.h>
>> @@ -155,9 +154,6 @@ struct bq24190_dev_info {
>> struct device *dev;
>> struct power_supply *charger;
>> struct power_supply *battery;
>> - struct extcon_dev *extcon;
>> - struct notifier_block extcon_nb;
>> - struct delayed_work extcon_work;
>> char model_name[I2C_NAME_SIZE];
>> bool initialized;
>> bool irq_event;
>> @@ -1530,75 +1526,6 @@ static irqreturn_t bq24190_irq_handler_thread(int irq, void *data)
>> return IRQ_HANDLED;
>> }
>>
>> -static void bq24190_extcon_work(struct work_struct *work)
>> -{
>> - struct bq24190_dev_info *bdi =
>> - container_of(work, struct bq24190_dev_info, extcon_work.work);
>> - int error, iinlim = 0;
>> - u8 v;
>> -
>> - error = pm_runtime_get_sync(bdi->dev);
>> - if (error < 0) {
>> - dev_warn(bdi->dev, "pm_runtime_get failed: %i\n", error);
>> - pm_runtime_put_noidle(bdi->dev);
>> - return;
>> - }
>> -
>> - if (extcon_get_state(bdi->extcon, EXTCON_CHG_USB_SDP) == 1)
>> - iinlim = 500000;
>> - else if (extcon_get_state(bdi->extcon, EXTCON_CHG_USB_CDP) == 1 ||
>> - extcon_get_state(bdi->extcon, EXTCON_CHG_USB_ACA) == 1)
>> - iinlim = 1500000;
>> - else if (extcon_get_state(bdi->extcon, EXTCON_CHG_USB_DCP) == 1)
>> - iinlim = 2000000;
>> -
>> - if (iinlim) {
>> - error = bq24190_set_field_val(bdi, BQ24190_REG_ISC,
>> - BQ24190_REG_ISC_IINLIM_MASK,
>> - BQ24190_REG_ISC_IINLIM_SHIFT,
>> - bq24190_isc_iinlim_values,
>> - ARRAY_SIZE(bq24190_isc_iinlim_values),
>> - iinlim);
>> - if (error < 0)
>> - dev_err(bdi->dev, "Can't set IINLIM: %d\n", error);
>> - }
>> -
>> - /* if no charger found and in USB host mode, set OTG 5V boost, else normal */
>> - if (!iinlim && extcon_get_state(bdi->extcon, EXTCON_USB_HOST) == 1)
>> - v = BQ24190_REG_POC_CHG_CONFIG_OTG;
>> - else
>> - v = BQ24190_REG_POC_CHG_CONFIG_CHARGE;
>> -
>> - error = bq24190_write_mask(bdi, BQ24190_REG_POC,
>> - BQ24190_REG_POC_CHG_CONFIG_MASK,
>> - BQ24190_REG_POC_CHG_CONFIG_SHIFT,
>> - v);
>> - if (error < 0)
>> - dev_err(bdi->dev, "Can't set CHG_CONFIG: %d\n", error);
>> -
>> - pm_runtime_mark_last_busy(bdi->dev);
>> - pm_runtime_put_autosuspend(bdi->dev);
>> -}
>> -
>> -static int bq24190_extcon_event(struct notifier_block *nb, unsigned long event,
>> - void *param)
>> -{
>> - struct bq24190_dev_info *bdi =
>> - container_of(nb, struct bq24190_dev_info, extcon_nb);
>> -
>> - /*
>> - * The Power-Good detection may take up to 220ms, sometimes
>> - * the external charger detection is quicker, and the bq24190 will
>> - * reset to iinlim based on its own charger detection (which is not
>> - * hooked up when using external charger detection) resulting in
>> - * a too low default 500mA iinlim. Delay applying the extcon value
>> - * for 300ms to avoid this.
>> - */
>> - queue_delayed_work(system_wq, &bdi->extcon_work, msecs_to_jiffies(300));
>> -
>> - return NOTIFY_OK;
>> -}
>> -
>> static int bq24190_hw_init(struct bq24190_dev_info *bdi)
>> {
>> u8 v;
>> @@ -1636,7 +1563,6 @@ static int bq24190_probe(struct i2c_client *client,
>> struct device *dev = &client->dev;
>> struct power_supply_config charger_cfg = {}, battery_cfg = {};
>> struct bq24190_dev_info *bdi;
>> - const char *name;
>> int ret;
>>
>> if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
>> @@ -1668,25 +1594,6 @@ static int bq24190_probe(struct i2c_client *client,
>> device_property_read_bool(dev,
>> "input-current-limit-from-supplier");
>>
>> - /*
>> - * Devicetree platforms should get extcon via phandle (not yet supported).
>> - * On ACPI platforms, extcon clients may invoke us with:
>> - * struct property_entry pe[] =
>> - * { PROPERTY_ENTRY_STRING("extcon-name", client_name), ... };
>> - * struct i2c_board_info bi =
>> - * { .type = "bq24190", .addr = 0x6b, .properties = pe, .irq = irq };
>> - * struct i2c_adapter ad = { ... };
>> - * i2c_add_adapter(&ad);
>> - * i2c_new_device(&ad, &bi);
>> - */
>
> Maybe we should keep a variation of the above comment, documenting how
> we're invoked by another driver, and the dev props it sets for us.

Ok, I will move this comment to one of the other props for v2.

Regards,

Hans

\
 
 \ /
  Last update: 2017-08-08 11:13    [W:1.987 / U:2.648 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site