lkml.org 
[lkml]   [2017]   [Aug]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] clk: hi3660: fix incorrect uart3 clock freqency
Date
From: Zhong Kaihua <zhongkaihua@huawei.com>

UART3 clock rate is doubled in previous commit.

This error is not detected until recently a mezzanine board which makes
real use of uart3 port (through LS connector of 96boards) was setup
and tested on hi3660-hikey960 board.

This patch changes clock source rate of clk_factor_uart3 to 100000000.

Signed-off-by: Zhong Kaihua <zhongkaihua@huawei.com>
Signed-off-by: Guodong Xu <guodong.xu@linaro.org>
---
drivers/clk/hisilicon/clk-hi3660.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/hisilicon/clk-hi3660.c b/drivers/clk/hisilicon/clk-hi3660.c
index a18258e..f404199 100644
--- a/drivers/clk/hisilicon/clk-hi3660.c
+++ b/drivers/clk/hisilicon/clk-hi3660.c
@@ -34,7 +34,7 @@ static const struct hisi_fixed_rate_clock hi3660_fixed_rate_clks[] = {

/* crgctrl */
static const struct hisi_fixed_factor_clock hi3660_crg_fixed_factor_clks[] = {
- { HI3660_FACTOR_UART3, "clk_factor_uart3", "iomcu_peri0", 1, 8, 0, },
+ { HI3660_FACTOR_UART3, "clk_factor_uart3", "iomcu_peri0", 1, 16, 0, },
{ HI3660_CLK_FACTOR_MMC, "clk_factor_mmc", "clkin_sys", 1, 6, 0, },
{ HI3660_CLK_GATE_I2C0, "clk_gate_i2c0", "clk_i2c0_iomcu", 1, 4, 0, },
{ HI3660_CLK_GATE_I2C1, "clk_gate_i2c1", "clk_i2c1_iomcu", 1, 4, 0, },
--
2.10.2
\
 
 \ /
  Last update: 2017-08-07 16:52    [W:0.059 / U:1.360 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site