lkml.org 
[lkml]   [2017]   [Aug]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH] serio: PS2 gpio bit banging driver for the serio bus
On Tue, Aug 1, 2017 at 12:24 AM, Danilo Krummrich
<danilokrummrich@dk-develop.de> wrote:

> This driver provides PS2 serio bus support by implementing bit banging
> with the GPIO API. The GPIO pins, data and clock, can be configured with
> a node in the device tree or by static platform data.
>
> Writing to a device is supported as well, though it is not recommended as
> the timings to be halt given by libps2 are very tough and difficult to
> reach with bit banging. Therefore it can be configured (also in DT and
> pdata) whether the serio write function should be available for clients.
>
> This driver is for development purposes and not for productive use.
> However, this driver can be useful e.g. when no USB port is available or
> using old peripherals is desired as PS2 controllers getting rare.
>
> This driver was tested on a RPI1 and on Hikey960 and it worked well
> together with the atkbd driver.
>
> Signed-off-by: Danilo Krummrich <danilokrummrich@dk-develop.de>

> +++ b/Documentation/devicetree/bindings/serio/ps2-gpio.txt

When you add DT bindings you have to CC devicetree@vger.kernel.org

> @@ -0,0 +1,20 @@
> +Device-Tree bindings for ps2 gpio driver
> +
> +Required properties:
> + - compatible = "ps2-gpio";
> + - gpios: data and clock gpio
> +
> +Optional properties:
> + - ps2-gpio,write-enable: Indicates whether write function is provided
> + to serio device. Most probably providing the write fn will not work,
> + because of the tough timing libps2 requires.
> +
> +Example nodes:
> +
> +ps2@0 {
> + compatible = "ps2-gpio";
> + gpios = <&gpio 24 0 /* data */
> + &gpio 23 0 /* clock */
> + >;
> + i2c-gpio,write-enable = <0>;
> +};

These look fine to me though.

> diff --git a/Documentation/gpio/drivers-on-gpio.txt b/Documentation/gpio/drivers-on-gpio.txt

Thanks for patching this!

> +config SERIO_GPIO_PS2
> + tristate "GPIO PS/2 bit banging driver"
> + help
> + Say Y here if you want PS/2 bit banging support via GPIO.
> +
> + To compile this driver as a module, choose M here: the
> + module will be called gpio-ps2.
> +
> + If you are unsure, say N.

As mentioned

depends on GPIOLIB
depends on OF

> +#include <linux/gpio.h>

Use only:

#include <linux/gpio/consumer.h>

> +#include <linux/of_gpio.h>

Should not be needed.


> +struct ps2_gpio_data {
> + struct device *dev;
> + struct serio *serio;
> + unsigned char mode;
> + unsigned int gpio_clk;
> + unsigned int gpio_data;
> + unsigned int write_enable;

Do not use the global GPIO number space, use GPIO descriptors.

Example:
drivers/input/keyboard/gpio_keys.c

> +static int ps2_gpio_write(struct serio *serio, unsigned char val)
> +{
> + struct ps2_gpio_data *drvdata = serio->port_data;
> +
> + drvdata->mode = PS2_MODE_TX;
> + drvdata->tx_byte = val;
> + /* Make sure ISR running on other CPU notice changes. */
> + barrier();

This seems overengineered, is this really needed?

If we have races like this, the error is likely elsewhere, and should be
fixed in the GPIO driver MMIO access or so.

> + disable_irq_nosync(drvdata->irq);
> + gpio_direction_output(drvdata->gpio_clk, 0);

No use GPIO descriptors please.

> + // dev_info(drvdata->dev, "recv bit %u: %u\n", cnt, data);

Delete comments or convert to dev_dbg()

> +static int of_ps2_gpio_get_props(struct device *dev,
> + struct ps2_gpio_data *drvdata)
> +{
> + if (of_gpio_count(dev->of_node) < 2)
> + return -ENODEV;
> +
> + drvdata->gpio_data = of_get_gpio(dev->of_node, 0);
> + drvdata->gpio_clk = of_get_gpio(dev->of_node, 1);
> +
> + if (drvdata->gpio_data == -EPROBE_DEFER ||
> + drvdata->gpio_clk == -EPROBE_DEFER)
> + return -EPROBE_DEFER;
> +
> + if (!gpio_is_valid(drvdata->gpio_data) ||
> + !gpio_is_valid(drvdata->gpio_clk)) {
> + dev_err(dev, "invalid GPIOs, data=%d, clk=%d\n",
> + drvdata->gpio_data, drvdata->gpio_clk);
> + return -ENODEV;
> + }

With GPIO descriptors you should just gpiod_get(dev, "foo", FLAG);
No need to poke around in the device tree like this.

Error checks and deferrals apply as usual though.

> + error = devm_gpio_request(dev, drvdata->gpio_clk, "ps2 clk");
> + if (error) {
> + dev_err(dev, "failed to request gpio %u: %d",
> + drvdata->gpio_clk, error);
> + goto err_free_serio;
> + }
> +
> + error = devm_gpio_request(dev, drvdata->gpio_data, "ps2 data");
> + if (error) {
> + dev_err(dev, "failed to request gpio %u: %d",
> + drvdata->gpio_data, error);
> + goto err_free_serio;
> + }

So devm_gpiod_get(...)

> + gpio_direction_input(drvdata->gpio_clk);
> + gpio_direction_input(drvdata->gpio_data);

And incidentallt then you can just specify GPIOD_IN as flag and
it will be set up for you.

Yours,
Linus Walleij

\
 
 \ /
  Last update: 2017-08-07 11:04    [W:0.139 / U:1.816 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site