lkml.org 
[lkml]   [2017]   [Aug]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [linux-sunxi] [PATCH v3 05/12] ASoC: sun4i-i2s: Add regmap fields for channels
On 1 August 2017 at 10:31, Chen-Yu Tsai <wens@csie.org> wrote:
> On Sat, Jul 29, 2017 at 10:17 PM, <codekipper@gmail.com> wrote:
>> From: Marcus Cooper <codekipper@gmail.com>
>>
>> On the original i2s block the channel mapping and selection were
>> configured for stereo audio by default: This is not the case with
>> the newer SoCs and they are also located at different offsets.
>>
>> To support the newer SoC then regmap fields have been added to the
>> quirks and these are initialised to their correct settings during
>> probing.
>>
>> Signed-off-by: Marcus Cooper <codekipper@gmail.com>
>> ---
>> sound/soc/sunxi/sun4i-i2s.c | 80 ++++++++++++++++++++++++++++++++++++++++-----
>> 1 file changed, 72 insertions(+), 8 deletions(-)
>>
>> diff --git a/sound/soc/sunxi/sun4i-i2s.c b/sound/soc/sunxi/sun4i-i2s.c
>> index 2a25df22c2f8..120f797a38e8 100644
>> --- a/sound/soc/sunxi/sun4i-i2s.c
>> +++ b/sound/soc/sunxi/sun4i-i2s.c
>> @@ -82,7 +82,7 @@
>> #define SUN4I_I2S_TX_CNT_REG 0x2c
>>
>> #define SUN4I_I2S_TX_CHAN_SEL_REG 0x30
>> -#define SUN4I_I2S_TX_CHAN_SEL(num_chan) (((num_chan) - 1) << 0)
>> +#define SUN4I_I2S_CHAN_SEL(num_chan) (((num_chan) - 1) << 0)
>>
>> #define SUN4I_I2S_TX_CHAN_MAP_REG 0x34
>> #define SUN4I_I2S_TX_CHAN_MAP(chan, sample) ((sample) << (chan << 2))
>> @@ -98,6 +98,10 @@
>> * @sun4i_i2s_regmap: regmap config to use.
>> * @mclk_offset: Value by which mclkdiv needs to be adjusted.
>> * @bclk_offset: Value by which bclkdiv needs to be adjusted.
>> + * @field_txchanmap: location of the tx channel mapping register.
>> + * @field_rxchanmap: location of the rx channel mapping register.
>> + * @field_txchansel: location of the tx channel select bit fields.
>> + * @field_rxchansel: location of the rx channel select bit fields.
>> */
>> struct sun4i_i2s_quirks {
>> bool has_reset;
>> @@ -105,6 +109,12 @@ struct sun4i_i2s_quirks {
>> const struct regmap_config *sun4i_i2s_regmap;
>> unsigned int mclk_offset;
>> unsigned int bclk_offset;
>> +
>> + /* Register fields for i2s */
>> + struct reg_field field_txchanmap;
>> + struct reg_field field_rxchanmap;
>> + struct reg_field field_txchansel;
>> + struct reg_field field_rxchansel;
>> };
>>
>> struct sun4i_i2s {
>> @@ -118,6 +128,12 @@ struct sun4i_i2s {
>> struct snd_dmaengine_dai_dma_data capture_dma_data;
>> struct snd_dmaengine_dai_dma_data playback_dma_data;
>>
>> + /* Register fields for i2s */
>> + struct regmap_field *field_txchanmap;
>> + struct regmap_field *field_rxchanmap;
>> + struct regmap_field *field_txchansel;
>> + struct regmap_field *field_rxchansel;
>> +
>> const struct sun4i_i2s_quirks *variant;
>> };
>>
>> @@ -264,6 +280,18 @@ static int sun4i_i2s_hw_params(struct snd_pcm_substream *substream,
>> if (params_channels(params) != 2)
>> return -EINVAL;
>>
>> + /* Map the channels for playback and capture */
>> + regmap_field_write(i2s->field_txchanmap, 0x76543210);
>> + regmap_field_write(i2s->field_rxchanmap, 0x00003210);
>> +
>> + /* Configure the channels */
>> + regmap_field_write(i2s->field_txchansel,
>> + SUN4I_I2S_CHAN_SEL(params_channels(params)));
>> +
>> + regmap_field_write(i2s->field_rxchansel,
>> + SUN4I_I2S_CHAN_SEL(params_channels(params)));
>> +
>> +
>
> Checkpatch says don't use multiple blank lines.
>
>> switch (params_physical_width(params)) {
>> case 16:
>> width = DMA_SLAVE_BUSWIDTH_2_BYTES;
>> @@ -486,13 +514,6 @@ static int sun4i_i2s_startup(struct snd_pcm_substream *substream,
>> SUN4I_I2S_CTRL_SDO_EN_MASK,
>> SUN4I_I2S_CTRL_SDO_EN(0));
>>
>> - /* Enable the first two channels */
>> - regmap_write(i2s->regmap, SUN4I_I2S_TX_CHAN_SEL_REG,
>> - SUN4I_I2S_TX_CHAN_SEL(2));
>> -
>> - /* Map them to the two first samples coming in */
>> - regmap_write(i2s->regmap, SUN4I_I2S_TX_CHAN_MAP_REG,
>> - SUN4I_I2S_TX_CHAN_MAP(0, 0) | SUN4I_I2S_TX_CHAN_MAP(1, 1));
>>
>> return clk_prepare_enable(i2s->mod_clk);
>> }
>> @@ -677,14 +698,51 @@ static const struct sun4i_i2s_quirks sun4i_a10_i2s_quirks = {
>> .has_reset = false,
>> .reg_offset_txdata = SUN4I_I2S_FIFO_TX_REG,
>> .sun4i_i2s_regmap = &sun4i_i2s_regmap_config,
>> + .field_txchanmap = REG_FIELD(SUN4I_I2S_TX_CHAN_MAP_REG, 0, 31),
>> + .field_rxchanmap = REG_FIELD(SUN4I_I2S_RX_CHAN_MAP_REG, 0, 31),
>> + .field_txchansel = REG_FIELD(SUN4I_I2S_TX_CHAN_SEL_REG, 0, 2),
>> + .field_rxchansel = REG_FIELD(SUN4I_I2S_RX_CHAN_SEL_REG, 0, 2),
>> };
>>
>> static const struct sun4i_i2s_quirks sun6i_a31_i2s_quirks = {
>> .has_reset = true,
>> .reg_offset_txdata = SUN4I_I2S_FIFO_TX_REG,
>> .sun4i_i2s_regmap = &sun4i_i2s_regmap_config,
>> + .field_txchanmap = REG_FIELD(SUN4I_I2S_TX_CHAN_MAP_REG, 0, 31),
>> + .field_rxchanmap = REG_FIELD(SUN4I_I2S_RX_CHAN_MAP_REG, 0, 31),
>> + .field_txchansel = REG_FIELD(SUN4I_I2S_TX_CHAN_SEL_REG, 0, 2),
>> + .field_rxchansel = REG_FIELD(SUN4I_I2S_RX_CHAN_SEL_REG, 0, 2),
>> };
>>
>> +static int sun4i_i2s_init_regmap_fields(struct device *dev, struct sun4i_i2s *i2s)
>
> This line is over 80 characters. Please wrap the line.
>
>> +{
>> + i2s->field_txchanmap =
>> + devm_regmap_field_alloc(dev, i2s->regmap,
>> + i2s->variant->field_txchanmap);
>> + if (IS_ERR(i2s->field_txchanmap))
>> + return PTR_ERR(i2s->field_txchanmap);
>> +
>> + i2s->field_rxchanmap =
>> + devm_regmap_field_alloc(dev, i2s->regmap,
>> + i2s->variant->field_rxchanmap);
>> + if (IS_ERR(i2s->field_rxchanmap))
>> + return PTR_ERR(i2s->field_rxchanmap);
>> +
>> + i2s->field_txchansel =
>> + devm_regmap_field_alloc(dev, i2s->regmap,
>> + i2s->variant->field_txchansel);
>> + if (IS_ERR(i2s->field_txchansel))
>> + return PTR_ERR(i2s->field_txchansel);
>> +
>> + i2s->field_rxchansel =
>> + devm_regmap_field_alloc(dev, i2s->regmap,
>> + i2s->variant->field_rxchansel);
>> + if (IS_ERR(i2s->field_rxchansel))
>> + return PTR_ERR(i2s->field_rxchansel);
>> +
>> + return 0;
>
> This seems to be the last "if (IS_ERR()) return PTR_ERR()" sequence.
> So it looks like you could apply the PTR_ERR_OR_ZERO hunk from the
> kbuild test robot. I wasn't aware of this preference before, and to
> be honest I'm fine either way.
>
ACK,
BR,
CK
> Otherwise,
>
> Reviewed-by: Chen-Yu Tsai <wens@csie.org>
>
>
>> +}
>> +
>> static int sun4i_i2s_probe(struct platform_device *pdev)
>> {
>> struct sun4i_i2s *i2s;
>> @@ -778,6 +836,12 @@ static int sun4i_i2s_probe(struct platform_device *pdev)
>> goto err_suspend;
>> }
>>
>> + ret = sun4i_i2s_init_regmap_fields(&pdev->dev, i2s);
>> + if (ret) {
>> + dev_err(&pdev->dev, "Could not initialise regmap fields\n");
>> + goto err_suspend;
>> + }
>> +
>> return 0;
>>
>> err_suspend:
>> --
>> 2.13.3
>>
>> --
>> You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
>> To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe@googlegroups.com.
>> For more options, visit https://groups.google.com/d/optout.

\
 
 \ /
  Last update: 2017-08-07 09:40    [W:0.106 / U:5.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site