lkml.org 
[lkml]   [2017]   [Aug]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: [PATCH 18/18] i2c-cht-wc: Add device-properties for fusb302 integration
From
Date
On 08/06/2017 05:35 AM, Hans de Goede wrote:
> Add device-properties to make the bq24292i controller connected to
> the bus get its input-current-limit from the fusb302 Type-C port
> controller which is used on boards with the cht-wc PMIC.
>
> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
> ---
> drivers/i2c/busses/Kconfig | 5 +++++
> drivers/i2c/busses/i2c-cht-wc.c | 5 ++++-
> 2 files changed, 9 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
> index f20b1f84013a..6de21a81b00b 100644
> --- a/drivers/i2c/busses/Kconfig
> +++ b/drivers/i2c/busses/Kconfig
> @@ -197,6 +197,11 @@ config I2C_CHT_WC
> SMBus controller found in the Intel Cherry Trail Whiskey Cove PMIC
> found on some Intel Cherry Trail systems.
>
> + Note this controller is hooked up to a TI bq24292i charger-IC,
> + combined with a FUSB302 Type-C port-controller as such it is advised
> + to also select CONFIG_CHARGER_BQ24190=m and CONFIG_TYPEC_FUSB302=m
> + (the fusb302 driver currently is in drivers/staging).
> +

Just wondering - is this always the case ? What if someone builds a system with
different charger and port controller ICs ?

> config I2C_NFORCE2
> tristate "Nvidia nForce2, nForce3 and nForce4"
> depends on PCI
> diff --git a/drivers/i2c/busses/i2c-cht-wc.c b/drivers/i2c/busses/i2c-cht-wc.c
> index ccf0785bcb75..08229fb12615 100644
> --- a/drivers/i2c/busses/i2c-cht-wc.c
> +++ b/drivers/i2c/busses/i2c-cht-wc.c
> @@ -211,8 +211,11 @@ static const struct irq_chip cht_wc_i2c_irq_chip = {
> .name = "cht_wc_ext_chrg_irq_chip",
> };
>
> +static const char * const bq24190_suppliers[] = { "fusb302-typec-source" };
> +
> static const struct property_entry bq24190_props[] = {
> - PROPERTY_ENTRY_STRING("extcon-name", "cht_wcove_pwrsrc"),
> + PROPERTY_ENTRY_STRING_ARRAY("supplied-from", bq24190_suppliers),
> + PROPERTY_ENTRY_BOOL("input-current-limit-from-supplier"),
> PROPERTY_ENTRY_BOOL("omit-battery-class"),
> PROPERTY_ENTRY_BOOL("disable-reset"),
> { }
>

\
 
 \ /
  Last update: 2017-08-06 16:36    [W:0.130 / U:7.796 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site