Messages in this thread |  | | Subject | Re: [PATCH 09/18] staging: typec: fusb302: Use tcpm_set_current_limit_psy | From | Guenter Roeck <> | Date | Sun, 6 Aug 2017 07:24:31 -0700 |
| |
On 08/06/2017 05:35 AM, Hans de Goede wrote: > Register a power_supply and use tcpm_set_current_limit_psy as > set_current_limit so that another driver (e.g. the charger driver) can > pick the limit up and configure the system accordingly. > > Signed-off-by: Hans de Goede <hdegoede@redhat.com> > --- > drivers/staging/typec/fusb302/fusb302.c | 18 ++++++------------ > 1 file changed, 6 insertions(+), 12 deletions(-) > > diff --git a/drivers/staging/typec/fusb302/fusb302.c b/drivers/staging/typec/fusb302/fusb302.c > index 1d8c9b66df2f..e1e08f57af99 100644 > --- a/drivers/staging/typec/fusb302/fusb302.c > +++ b/drivers/staging/typec/fusb302/fusb302.c > @@ -854,17 +854,6 @@ static int tcpm_set_vbus(struct tcpc_dev *dev, bool on, bool charge) > return ret; > } > > -static int tcpm_set_current_limit(struct tcpc_dev *dev, u32 max_ma, u32 mv) > -{ > - struct fusb302_chip *chip = container_of(dev, struct fusb302_chip, > - tcpc_dev); > - > - fusb302_log(chip, "current limit: %d ma, %d mv (not implemented)", > - max_ma, mv); > - > - return 0; > -} > -
Same comment as before. I think the fusb code should do what tcpm_set_current_limit_psy is doing, ie register with a power supply.
> static int fusb302_pd_tx_flush(struct fusb302_chip *chip) > { > return fusb302_i2c_set_bits(chip, FUSB_REG_CONTROL0, > @@ -1208,7 +1197,7 @@ static void init_tcpc_dev(struct tcpc_dev *fusb302_tcpc_dev) > fusb302_tcpc_dev->set_polarity = tcpm_set_polarity; > fusb302_tcpc_dev->set_vconn = tcpm_set_vconn; > fusb302_tcpc_dev->set_vbus = tcpm_set_vbus; > - fusb302_tcpc_dev->set_current_limit = tcpm_set_current_limit; > + fusb302_tcpc_dev->set_current_limit = tcpm_set_current_limit_psy; > fusb302_tcpc_dev->set_pd_rx = tcpm_set_pd_rx; > fusb302_tcpc_dev->set_roles = tcpm_set_roles; > fusb302_tcpc_dev->start_drp_toggling = tcpm_start_drp_toggling; > @@ -1733,6 +1722,11 @@ static int fusb302_probe(struct i2c_client *client, > return -EPROBE_DEFER; > } > > + ret = tcpm_register_psy(chip->dev, &chip->tcpc_dev, > + "fusb302-typec-source"); > + if (ret < 0) > + return ret; > + > ret = fusb302_debugfs_init(chip); > if (ret < 0) > return ret; >
|  |