[lkml]   [2017]   [Aug]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH v4] ARC: clk: introduce HSDK pll driver
On 08/25, Eugeniy Paltsev wrote:
> HSDK board manages its clocks using various PLLs. These PLL have same
> dividers and corresponding control registers mapped to different addresses.
> So we add one common driver for such PLLs.
> Each PLL on HSDK board consists of three dividers: IDIV, FBDIV and
> ODIV. Output clock value is managed using these dividers.
> We add pre-defined tables with supported rate values and appropriate
> configurations of IDIV, FBDIV and ODIV for each value.
> As of today we add support for PLLs that generate clock for the
> HSDK arc cpus, system, ddr, AXI tunnel and hdmi.
> By this patch we add support for several plls (arc cpus pll and others),
> so we had to use two different init types: CLK_OF_DECLARE for arc cpus pll
> and regular probing for others plls.
> Signed-off-by: Eugeniy Paltsev <>
> ---

Applied to clk-next

Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

 \ /
  Last update: 2017-08-31 07:38    [W:0.042 / U:1.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site