Messages in this thread |  | | Subject | Re: [PATCH v2 11/14] power: supply: bq24190_charger: Get input_current_limit from our supplier | From | Hans de Goede <> | Date | Mon, 28 Aug 2017 18:04:15 +0200 |
| |
Hi,
On 16-08-17 22:28, Liam Breck wrote: > Hi Hans, > > On Tue, Aug 15, 2017 at 1:04 PM, Hans de Goede <hdegoede@redhat.com> wrote: >> On some devices the USB Type-C port power (USB PD 2.0) negotiation is >> done by a separate port-controller IC, while the current limit is >> controlled through another (charger) IC. >> >> It has been decided to model this by modelling the external Type-C >> power brick (adapter/charger) as a power-supply class device which >> supplies the charger-IC, with its voltage-now and current-max representing >> the negotiated voltage and max current draw. >> >> This commit adds support for this to the bq24190_charger driver by calling >> power_supply_set_input_current_limit_from_supplier helper if the >> "input-current-limit-from-supplier" device-property is set. >> >> Note this replaces the functionality to get the current-limit from an >> extcon device, which will be removed in a follow-up commit. >> >> Signed-off-by: Hans de Goede <hdegoede@redhat.com> >> --- >> Changes in v2: >> -Wait a bit before applying current-max from our supplier as input-current-limit >> the bq24190 may still be in its power-good wait-state while our supplier is >> done negotating current-max and if we apply the limit to early then the >> input-current-limit will be reset to 0.5A by the bq24190 after its >> power-good wait is done. >> --- >> drivers/power/supply/bq24190_charger.c | 35 ++++++++++++++++++++++++++++++++++ >> 1 file changed, 35 insertions(+) >> >> diff --git a/drivers/power/supply/bq24190_charger.c b/drivers/power/supply/bq24190_charger.c >> index f13f892..6f75c8e 100644 >> --- a/drivers/power/supply/bq24190_charger.c >> +++ b/drivers/power/supply/bq24190_charger.c >> @@ -159,9 +159,11 @@ struct bq24190_dev_info { >> struct extcon_dev *extcon; >> struct notifier_block extcon_nb; >> struct delayed_work extcon_work; >> + struct delayed_work input_current_limit_work; >> char model_name[I2C_NAME_SIZE]; >> bool initialized; >> bool irq_event; >> + bool input_current_limit_from_supplier; >> struct mutex f_reg_lock; >> u8 f_reg; >> u8 ss_reg; >> @@ -1142,6 +1144,32 @@ static int bq24190_charger_property_is_writeable(struct power_supply *psy, >> return ret; >> } >> >> +static void bq24190_input_current_limit_work(struct work_struct *work) >> +{ >> + struct bq24190_dev_info *bdi = >> + container_of(work, struct bq24190_dev_info, >> + input_current_limit_work.work); >> + >> + power_supply_set_input_current_limit_from_supplier(bdi->charger); >> +} >> + >> +static void bq24190_charger_external_power_changed(struct power_supply *psy) >> +{ >> + struct bq24190_dev_info *bdi = power_supply_get_drvdata(psy); >> + >> + /* >> + * The Power-Good detection may take up to 220ms, sometimes >> + * the external charger detection is quicker, and the bq24190 will >> + * reset to iinlim based on its own charger detection (which is not >> + * hooked up when using external charger detection) resulting in a >> + * too low default 500mA iinlim. Delay setting the input-current-limit >> + * for 300ms to avoid this. >> + */ >> + if (bdi->input_current_limit_from_supplier) >> + queue_delayed_work(system_wq, &bdi->input_current_limit_work, >> + msecs_to_jiffies(300)); >> +} >> + >> static enum power_supply_property bq24190_charger_properties[] = { >> POWER_SUPPLY_PROP_CHARGE_TYPE, >> POWER_SUPPLY_PROP_HEALTH, >> @@ -1170,6 +1198,7 @@ static const struct power_supply_desc bq24190_charger_desc = { >> .get_property = bq24190_charger_get_property, >> .set_property = bq24190_charger_set_property, >> .property_is_writeable = bq24190_charger_property_is_writeable, >> + .external_power_changed = bq24190_charger_external_power_changed, >> }; >> >> /* Battery power supply property routines */ >> @@ -1651,6 +1680,8 @@ static int bq24190_probe(struct i2c_client *client, >> mutex_init(&bdi->f_reg_lock); >> bdi->f_reg = 0; >> bdi->ss_reg = BQ24190_REG_SS_VBUS_STAT_MASK; /* impossible state */ >> + INIT_DELAYED_WORK(&bdi->input_current_limit_work, >> + bq24190_input_current_limit_work); >> >> i2c_set_clientdata(client, bdi); >> >> @@ -1659,6 +1690,10 @@ static int bq24190_probe(struct i2c_client *client, >> return -EINVAL; >> } >> >> + bdi->input_current_limit_from_supplier = >> + device_property_read_bool(dev, >> + "input-current-limit-from-supplier"); >> + > > Maybe > if (device_property_read_bool(dev, > "linux,input-current-limit-from-supplier")) { > INIT_DELAYED_WORK(&bdi->input_current_limit_work, > bq24190_input_current_limit_work); > bdi->input_current_limit_from_supplier = true; // or use a field > in bdi->input_current_limit_work as the flag? > }
Done, except for making the flag a field in input_current_limit_work, input_current_limit_work is of type struct delayed_work so I cannot just add a field.
> Also should document property for DT use assuming Sebastian is ok with > new power_supply method.
Also done for v3 of this patch.
> And can you rebase to my pending series in next pass? There's nothing > controversial in it :-)
I've cherry-picked v3 of the patch adding the dt-binding-doc to my tree so that I could add the documentation for the property on top. I will make sure to rebase on top of the rest once the rest is merged by Sebastian (otherwise I need to rebase after each revision of the patch-set).
Regards,
Hans
|  |