lkml.org 
[lkml]   [2017]   [Aug]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH net RESEND] PCI: fix oops when try to find Root Port for a PCI device
On Wed, Aug 16, 2017 at 09:33:03PM +0200, Thierry Reding wrote:
> On Tue, Aug 15, 2017 at 12:03:31PM -0500, Bjorn Helgaas wrote:
> > On Tue, Aug 15, 2017 at 11:24:48PM +0800, Ding Tianhong wrote:
> > > Eric report a oops when booting the system after applying
> > > the commit a99b646afa8a ("PCI: Disable PCIe Relaxed..."):
> > > ...
> >
> > > It looks like the pci_find_pcie_root_port() was trying to
> > > find the Root Port for the PCI device which is the Root
> > > Port already, it will return NULL and trigger the problem,
> > > so check the highest_pcie_bridge to fix thie problem.
> >
> > The problem was actually with a Root Complex Integrated Endpoint that
> > has no upstream PCIe device:
> >
> > 00:05.2 System peripheral: Intel Corporation Device 0e2a (rev 04)
> > Subsystem: Intel Corporation Device 0e2a
> > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> > Capabilities: [40] Express (v2) Root Complex Integrated Endpoint, MSI 00
> > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
> > ExtTag- RBE- FLReset-
> > DevCtl: Report errors: Correctable- Non-Fatal- Fatal+ Unsupported+
> > RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
> > MaxPayload 128 bytes, MaxReadReq 128 bytes
>
> I've started seeing this crash on Tegra K1 as well. Here's the device
> for which it oopses:
>
> 00:02.0 PCI bridge: NVIDIA Corporation TegraK1 PCIe x1 Bridge (rev a1) (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 391
> Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
> I/O behind bridge: 00001000-00001fff [size=4K]
> Memory behind bridge: 13000000-130fffff [size=1M]
> Prefetchable memory behind bridge: 0000000020000000-00000000200fffff [size=1M]
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
> BridgeCtl: Parity+ SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: [40] Subsystem: NVIDIA Corporation TegraK1 PCIe x1 Bridge
> Capabilities: [48] Power Management version 3
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+
> Address: 000000fcfffff000 Data: 0000
> Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed-
> Mapping Address Base: 00000000fee00000
> Capabilities: [80] Express (v2) Root Port (Slot+), MSI 00
> DevCap: MaxPayload 128 bytes, PhantFunc 0
> ExtTag+ RBE+
> DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
> RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+
> MaxPayload 128 bytes, MaxReadReq 512 bytes
> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
> LnkCap: Port #1, Speed 5GT/s, Width x1, ASPM L0s, Exit Latency L0s <512ns
> ClockPM- Surprise- LLActRep+ BwNot+ ASPMOptComp-
> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
> SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
> Slot #0, PowerLimit 0.000W; Interlock- NoCompl-
> SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
> Control: AttnInd Off, PwrInd On, Power- Interlock-
> SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
> Changed: MRL- PresDet+ LinkState+
> RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible-
> RootCap: CRSVisible-
> RootSta: PME ReqID 0000, PMEStatus- PMEPending-
> DevCap2: Completion Timeout: Range AB, TimeoutDis+, LTR-, OBFF Not Supported ARIFwd-
> AtomicOpsCap: Routing- 32bit- 64bit- 128bitCAS-
> DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
> AtomicOpsCtl: ReqEn- EgressBlck-
> LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
> Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
> Compliance De-emphasis: -6dB
> LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
> EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
> Kernel driver in use: pcieport
>
> > > Fixes: a99b646afa8a ("PCI: Disable PCIe Relaxed Ordering if unsupported")
> >
> > This also
> >
> > Fixes: c56d4450eb68 ("PCI: Turn off Request Attributes to avoid Chelsio T5 Completion erratum")
> >
> > which added pci_find_pcie_root_port(). Prior to this Relaxed Ordering
> > series, we only used pci_find_pcie_root_port() in a Chelsio quirk that
> > only applied to non-integrated endpoints, so we didn't trip over the
> > bug.
> >
> > > Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
> > > Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
> > > Signed-off-by: Ding Tianhong <dingtianhong@huawei.com>
> > > ---
> > > drivers/pci/pci.c | 3 ++-
> > > 1 file changed, 2 insertions(+), 1 deletion(-)
> > >
> > > diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
> > > index af0cc34..7e2022f 100644
> > > --- a/drivers/pci/pci.c
> > > +++ b/drivers/pci/pci.c
> > > @@ -522,7 +522,8 @@ struct pci_dev *pci_find_pcie_root_port(struct pci_dev *dev)
> > > bridge = pci_upstream_bridge(bridge);
> > > }
> > >
> > > - if (pci_pcie_type(highest_pcie_bridge) != PCI_EXP_TYPE_ROOT_PORT)
> > > + if (highest_pcie_bridge &&
> > > + pci_pcie_type(highest_pcie_bridge) != PCI_EXP_TYPE_ROOT_PORT)
> > > return NULL;
> > >
> > > return highest_pcie_bridge;
> > > --
> >
> > I think structuring the fix as follows is a little more readable:
> >
> > diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
> > index af0cc3456dc1..587cd7623ed8 100644
> > --- a/drivers/pci/pci.c
> > +++ b/drivers/pci/pci.c
> > @@ -522,10 +522,11 @@ struct pci_dev *pci_find_pcie_root_port(struct pci_dev *dev)
> > bridge = pci_upstream_bridge(bridge);
> > }
> >
> > - if (pci_pcie_type(highest_pcie_bridge) != PCI_EXP_TYPE_ROOT_PORT)
> > - return NULL;
> > + if (highest_pcie_bridge &&
> > + pci_pcie_type(highest_pcie_bridge) == PCI_EXP_TYPE_ROOT_PORT)
> > + return highest_pcie_bridge;
> >
> > - return highest_pcie_bridge;
> > + return NULL;
> > }
> > EXPORT_SYMBOL(pci_find_pcie_root_port);
>
> In case of Tegra, dev actually points to the root port. Now if I read
> the above code correctly, highest_pcie_bridge will still be NULL in that
> case, which in turn will return NULL from pci_find_pcie_root_port(). But
> shouldn't it really return dev?
>
> The patch that I used to fix the issue is this:
>
> --->8---
> diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
> index 2c712dcfd37d..dd56c1c05614 100644
> --- a/drivers/pci/pci.c
> +++ b/drivers/pci/pci.c
> @@ -514,7 +514,7 @@ EXPORT_SYMBOL(pci_find_resource);
> */
> struct pci_dev *pci_find_pcie_root_port(struct pci_dev *dev)
> {
> - struct pci_dev *bridge, *highest_pcie_bridge = NULL;
> + struct pci_dev *bridge, *highest_pcie_bridge = dev;
>
> bridge = pci_upstream_bridge(dev);
> while (bridge && pci_is_pcie(bridge)) {
> --->8---
>
> That works correctly if this function ends up being called on the PCIe
> root port, though perhaps that's not what this function is supposed to
> do. It's somewhat unclear from the kerneldoc what the function should
> be doing when called on a root port device itself.

Your fix looks right to me.

\
 
 \ /
  Last update: 2017-08-16 22:02    [W:0.048 / U:1.728 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site