[lkml]   [2017]   [Aug]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH v2 08/14] power: supply: Add power_supply_set_input_current_limit_from_supplier helper
* Hans de Goede <> [170815 13:06]:
> On some devices the USB Type-C port power (USB PD 2.0) negotiation is
> done by a separate port-controller IC, while the current limit is
> controlled through another (charger) IC.
> It has been decided to model this by modelling the external Type-C
> power brick (adapter/charger) as a power-supply class device which
> supplies the charger-IC, with its voltage-now and current-max representing
> the negotiated voltage and max current draw.
> This commit adds a power_supply_set_input_current_limit_from_supplier
> helper function which charger power-supply drivers can call to get
> the max-current from their supplier and have this applied
> through their set_property call-back to their input-current-limit.

Hmm so can this also be used for the USB gadget subsystem
to tell charge controller when it's OK to enable 500mA
charging after enumeration?

FYI, that's controlled by the bq24190 pin named OTG that should
be only set high after enumeration. Any ideas how that is wired
on your device? Does it connect to the USB PHY or to a GPIO



 \ /
  Last update: 2017-08-16 17:55    [W:0.106 / U:0.824 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site