lkml.org 
[lkml]   [2017]   [Aug]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/2] dt-bindings: mtd: Altera ASMI Parallel II IP Core
On Sun, Aug 06, 2017 at 11:24:02AM -0700, matthew.gerlach@linux.intel.com wrote:
> From: Matthew Gerlach <matthew.gerlach@linux.intel.com>
>
> Device Tree bindinds for Altera ASMI Parallel II IP Core.

s/bindinds/bindings/

>
> Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
> ---
> .../devicetree/bindings/mtd/altera-asmip2.txt | 22 ++++++++++++++++++++++
> 1 file changed, 22 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/mtd/altera-asmip2.txt
>
> diff --git a/Documentation/devicetree/bindings/mtd/altera-asmip2.txt b/Documentation/devicetree/bindings/mtd/altera-asmip2.txt
> new file mode 100644
> index 0000000..3380366
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mtd/altera-asmip2.txt
> @@ -0,0 +1,22 @@
> +* Altera ASMI Parallel II IP Core
> +
> +Required properties:
> +- compatible : Should be "altr,asmi_parallel2".

s/_/-/

> +- reg : A tuple consisting of a physical address and length.
> +
> +Optional subnodes:
> +Subnodes of the Altera ASMI Paralllel II IP Core are spi slave nodes.

But this is not a general purpose SPI controller?

> +- reg : chip select value
> +- label : optional user friendly label
> +
> +Example:
> +
> +qspi: spi@a0001000 {
> + compatible = "altr,asmi_parallel2";
> + reg = <0xa0001000 0x10>;
> +
> + flash@0 {

This should have a compatible.

> + reg = <0>;
> + label = "FPGA Image";
> + };
> +};
> --
> 2.7.4
>

\
 
 \ /
  Last update: 2017-08-10 22:35    [W:0.098 / U:2.332 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site