lkml.org 
[lkml]   [2017]   [Jul]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[RFC PATCH 0/2] Add sideband data extraction
Date
These patches implements optional DT properties to generate
smaller sideband data from RID which can be further mapped
to MSI Device ID or Stream ID

On some of the systems, sideband data is smaller than RID
(16bits). For such system, sideband data has to be generated
by dropping some of the RID bits

the process of sideband data extracted from RID can be expressed
using optional DT property {iommu/msi}-map-drop-mask.

Example: If drop-mask is 0xFF09 then sideband data is
8 bits bus number followed by 1 bit of device number and
1 bit function number. This means drop-mask=0xFF09 will
convert RID=0x1a10 (16bits) to sideband data 0x6a (10bits).

Srinath Mannam (2):
dt-bindings: pci: Add drop mask property for MSI and IOMMU
pcie: sideband data by dropping RID bits

.../devicetree/bindings/pci/pci-iommu.txt | 31 ++++++++++++++
Documentation/devicetree/bindings/pci/pci-msi.txt | 33 +++++++++++++++
drivers/iommu/of_iommu.c | 4 +-
drivers/of/irq.c | 3 +-
drivers/of/of_pci.c | 48 ++++++++++++++++++++--
include/linux/of_pci.h | 6 ++-
6 files changed, 117 insertions(+), 8 deletions(-)

--
2.7.4

\
 
 \ /
  Last update: 2017-07-07 09:10    [W:0.110 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site