lkml.org 
[lkml]   [2017]   [Jul]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] usb: dwc3: omap: remove IRQ_NOAUTOEN used with shared irq
Date
IRQ_NOAUTOEN cannot be used with shared IRQs, since commit 04c848d39879
("genirq: Warn when IRQ_NOAUTOEN is used with shared interrupts") and
kernel now throws a warn dump. But OMAP DWC3 driver uses this flag. As
per commit 12a7f17fac5b ("usb: dwc3: omap: fix race of pm runtime with
irq handler in probe") that introduced this flag, PM runtime can race
with IRQ handler when deferred probing happens due to extcon,
therefore IRQ_NOAUTOEN needs to be set so that irq is not enabled until
extcon is registered.

Remove setting of IRQ_NOAUTOEN and move the registration of
shared irq to a point after dwc3_omap_extcon_register() and
of_platform_populate(). This avoids possibility of probe deferring and
above said race condition.

Signed-off-by: Vignesh R <vigneshr@ti.com>
---
drivers/usb/dwc3/dwc3-omap.c | 18 ++++++++----------
1 file changed, 8 insertions(+), 10 deletions(-)

diff --git a/drivers/usb/dwc3/dwc3-omap.c b/drivers/usb/dwc3/dwc3-omap.c
index 98926504b55b..f5aaa0cf3873 100644
--- a/drivers/usb/dwc3/dwc3-omap.c
+++ b/drivers/usb/dwc3/dwc3-omap.c
@@ -512,15 +512,6 @@ static int dwc3_omap_probe(struct platform_device *pdev)

/* check the DMA Status */
reg = dwc3_omap_readl(omap->base, USBOTGSS_SYSCONFIG);
- irq_set_status_flags(omap->irq, IRQ_NOAUTOEN);
- ret = devm_request_threaded_irq(dev, omap->irq, dwc3_omap_interrupt,
- dwc3_omap_interrupt_thread, IRQF_SHARED,
- "dwc3-omap", omap);
- if (ret) {
- dev_err(dev, "failed to request IRQ #%d --> %d\n",
- omap->irq, ret);
- goto err1;
- }

ret = dwc3_omap_extcon_register(omap);
if (ret < 0)
@@ -532,8 +523,15 @@ static int dwc3_omap_probe(struct platform_device *pdev)
goto err1;
}

+ ret = devm_request_threaded_irq(dev, omap->irq, dwc3_omap_interrupt,
+ dwc3_omap_interrupt_thread, IRQF_SHARED,
+ "dwc3-omap", omap);
+ if (ret) {
+ dev_err(dev, "failed to request IRQ #%d --> %d\n",
+ omap->irq, ret);
+ goto err1;
+ }
dwc3_omap_enable_irqs(omap);
- enable_irq(omap->irq);
return 0;

err1:
--
2.13.0
\
 
 \ /
  Last update: 2017-07-07 08:23    [W:0.026 / U:3.148 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site