lkml.org 
[lkml]   [2017]   [Jul]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] ARM: dts: at91: sama5d2_xplained: use pin macros instead of numbers
Date
Use pin macros instead of magic numbers to ease interpretation.

Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
---
arch/arm/boot/dts/at91-sama5d2_xplained.dts | 24 ++++++++++++------------
1 file changed, 12 insertions(+), 12 deletions(-)

diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
index 2e2c3d1a1fa2..8dc436631b8d 100644
--- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
@@ -68,7 +68,7 @@

ahb {
usb0: gadget@00300000 {
- atmel,vbus-gpio = <&pioA 31 GPIO_ACTIVE_HIGH>;
+ atmel,vbus-gpio = <&pioA PIN_PA31 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usba_vbus>;
status = "okay";
@@ -76,8 +76,8 @@

usb1: ohci@00400000 {
num-ports = <3>;
- atmel,vbus-gpio = <0 /* &pioA 41 GPIO_ACTIVE_HIGH */
- &pioA 42 GPIO_ACTIVE_HIGH
+ atmel,vbus-gpio = <0 /* &pioA PIN_PB9 GPIO_ACTIVE_HIGH */
+ &pioA PIN_PB10 GPIO_ACTIVE_HIGH
0
>;
pinctrl-names = "default";
@@ -127,7 +127,7 @@
ethernet-phy@1 {
reg = <0x1>;
interrupt-parent = <&pioA>;
- interrupts = <73 IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <PIN_PC9 IRQ_TYPE_LEVEL_LOW>;
};
};

@@ -160,9 +160,9 @@
compatible = "active-semi,act8945a";
reg = <0x5b>;
active-semi,vsel-high;
- active-semi,chglev-gpios = <&pioA 12 GPIO_ACTIVE_HIGH>;
- active-semi,lbo-gpios = <&pioA 72 GPIO_ACTIVE_LOW>;
- active-semi,irq_gpios = <&pioA 45 GPIO_ACTIVE_LOW>;
+ active-semi,chglev-gpios = <&pioA PIN_PA12 GPIO_ACTIVE_HIGH>;
+ active-semi,lbo-gpios = <&pioA PIN_PC8 GPIO_ACTIVE_LOW>;
+ active-semi,irq_gpios = <&pioA PIN_PB13 GPIO_ACTIVE_LOW>;
active-semi,input-voltage-threshold-microvolt = <6600>;
active-semi,precondition-timeout = <40>;
active-semi,total-timeout = <3>;
@@ -504,7 +504,7 @@

bp1 {
label = "PB_USER";
- gpios = <&pioA 41 GPIO_ACTIVE_LOW>;
+ gpios = <&pioA PIN_PB9 GPIO_ACTIVE_LOW>;
linux,code = <0x104>;
};
};
@@ -517,17 +517,17 @@

red {
label = "red";
- gpios = <&pioA 38 GPIO_ACTIVE_LOW>;
- };
+ gpios = <&pioA PIN_PB6 GPIO_ACTIVE_LOW>;
+

green {
label = "green";
- gpios = <&pioA 37 GPIO_ACTIVE_LOW>;
+ gpios = <&pioA PIN_PB5 GPIO_ACTIVE_LOW>;
};

blue {
label = "blue";
- gpios = <&pioA 32 GPIO_ACTIVE_LOW>;
+ gpios = <&pioA PIN_PB0 GPIO_ACTIVE_LOW>;
linux,default-trigger = "heartbeat";
};
};
--
2.12.2
\
 
 \ /
  Last update: 2017-07-07 15:59    [W:0.057 / U:16.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site