lkml.org 
[lkml]   [2017]   [Jul]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v7 3/6] dt-bindings: media: Document Synopsys Designware HDMI RX
Date
Document the bindings for the Synopsys Designware HDMI RX.

Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: Carlos Palminha <palminha@synopsys.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Sylwester Nawrocki <snawrocki@kernel.org>
Cc: devicetree@vger.kernel.org

Changes from v6:
- Document which properties are required/optional (Sylwester)
- Drop compatible string for SoC (Sylwester)
- Reword edid-phandle property (Sylwester)
- Typo fixes (Sylwester)
Changes from v4:
- Use "cfg" instead of "cfg-clk" (Rob)
- Change node names (Rob)
Changes from v3:
- Document the new DT bindings suggested by Sylwester
Changes from v2:
- Document edid-phandle property
---
.../devicetree/bindings/media/snps,dw-hdmi-rx.txt | 74 ++++++++++++++++++++++
1 file changed, 74 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/snps,dw-hdmi-rx.txt

diff --git a/Documentation/devicetree/bindings/media/snps,dw-hdmi-rx.txt b/Documentation/devicetree/bindings/media/snps,dw-hdmi-rx.txt
new file mode 100644
index 0000000..6c49aae
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/snps,dw-hdmi-rx.txt
@@ -0,0 +1,74 @@
+Synopsys DesignWare HDMI RX Decoder
+===================================
+
+This document defines device tree properties for the Synopsys DesignWare HDMI
+RX Decoder (DWC HDMI RX). It doesn't constitute a device tree binding
+specification by itself but is meant to be referenced by platform-specific
+device tree bindings.
+
+The properties bellow belong to the Synopsys DesignWare HDMI RX Decoder node.
+
+- compatible: Required property. Shall be "snps,dw-hdmi-rx".
+
+- reg: Required property. Memory mapped base address and length of the DWC
+HDMI RX registers.
+
+- interrupts: Required property. Reference to the DWC HDMI RX interrupt and
+HDMI 5V sense interrupt.
+
+- clocks: Required property. Phandle to the config clock block.
+
+- clock-names: Required property. Shall be "cfg".
+
+- edid-phandle: Optional proerty. phandle to the EDID handler block; if this
+property is not specified it is assumed that EDID is handled by device
+described by parent node of the HDMI RX node. You should not specify this
+property if your HDMI RX controller does not have CEC.
+
+- #address-cells: Required property. Shall be 1.
+
+- #size-cells: Required property. Shall be 0.
+
+You also have to create a subnode for the PHY device. PHY node properties are
+as follows.
+
+- compatible: Required property. Shall be "snps,dw-hdmi-phy-e405".
+
+- reg: Required property. Shall be JTAG address of the PHY.
+
+- clocks: Required property. Phandle for cfg clock.
+
+- clock-names: Required property. Shall be "cfg".
+
+A sample binding is now provided. The compatible string is for a SoC which has
+has a Synopsys DesignWare HDMI RX decoder inside.
+
+Example:
+
+dw_hdmi_soc: dw-hdmi-soc@0 {
+ compatible = "...";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ hdmi-rx@0 {
+ compatible = "snps,dw-hdmi-rx";
+ reg = <0x0 0x10000>;
+ interrupts = <1 2>;
+ edid-phandle = <&dw_hdmi_soc>;
+
+ clocks = <&dw_hdmi_refclk>;
+ clock-names = "cfg";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hdmi-phy@fc {
+ compatible = "snps,dw-hdmi-phy-e405";
+ reg = <0xfc>;
+
+ clocks = <&dw_hdmi_refclk>;
+ clock-names = "cfg";
+ };
+ };
+};
--
1.9.1

\
 
 \ /
  Last update: 2017-07-07 13:11    [W:0.045 / U:1.904 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site