[lkml]   [2017]   [Jul]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Patch in this message
Subject[PATCHv5 2/6] dt-bindings: mfd: da9052: support TSI as ADC
DA9052 allows using the touchscreen input pins as general purpose
analogue input pin by wiring analogue inputs to X+, X-, Y+ and Y-
and providing a reference voltage at TSIREF pin.

Signed-off-by: Sebastian Reichel <>
Documentation/devicetree/bindings/mfd/da9052-i2c.txt | 8 ++++++++
1 file changed, 8 insertions(+)

diff --git a/Documentation/devicetree/bindings/mfd/da9052-i2c.txt b/Documentation/devicetree/bindings/mfd/da9052-i2c.txt
index 9554292dc6cb..57fa74e65664 100644
--- a/Documentation/devicetree/bindings/mfd/da9052-i2c.txt
+++ b/Documentation/devicetree/bindings/mfd/da9052-i2c.txt
@@ -4,6 +4,14 @@ Required properties:
- compatible : Should be "dlg,da9052", "dlg,da9053-aa",
"dlg,da9053-ab", or "dlg,da9053-bb"

+Optional properties:
+- dlg,tsi-as-adc : Boolean, if set the X+, X-, Y+, Y- touchscreen
+ input lines are used as general purpose analogue
+ input.
+- tsiref-supply: Phandle to the regulator, which provides the reference
+ voltage for the TSIREF pin. Must be provided when the
+ touchscreen pins are used for ADC purposes.
- regulators : Contain the regulator nodes. The DA9052/53 regulators are
bound using their names as listed below:
 \ /
  Last update: 2017-07-03 10:42    [W:0.090 / U:6.272 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site