lkml.org 
[lkml]   [2017]   [Jul]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v1 1/1] usb:xhci: update condition to select bus->sysdev from parent device
On Tue, Jun 6, 2017 at 2:11 PM, Thang Q. Nguyen <tqnguyen@apm.com> wrote:
> For commit 4c39d4b949d3 ("usb: xhci: use bus->sysdev for DMA
> configuration"), sysdev points to devices known to the system firmware
> or hardware for DMA parameters.
> However, the parent of the system firmware/hardware device checking
> logic does not work in ACPI boot mode. This patch updates the formulation
> to check this case in both DT and ACPI.
>
> Signed-off-by: Tung Nguyen <tunguyen@apm.com>
> Signed-off-by: Thang Q. Nguyen <tqnguyen@apm.com>
> ---
> drivers/usb/host/xhci-plat.c | 4 +++-
> 1 files changed, 3 insertions(+), 1 deletions(-)
>
> diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
> index c04144b..e3e342a 100644
> --- a/drivers/usb/host/xhci-plat.c
> +++ b/drivers/usb/host/xhci-plat.c
> @@ -187,7 +187,9 @@ static int xhci_plat_probe(struct platform_device *pdev)
> * 3. xhci_plat is grandchild of a pci device (dwc3-pci)
> */
> sysdev = &pdev->dev;
> - if (sysdev->parent && !sysdev->of_node && sysdev->parent->of_node)
> + if (sysdev->parent && (sysdev->fwnode->type == FWNODE_PDATA) &&
> + (is_of_node(sysdev->parent->fwnode) ||
> + is_acpi_device_node(sysdev->parent->fwnode)))
> sysdev = sysdev->parent;
> #ifdef CONFIG_PCI
> else if (sysdev->parent && sysdev->parent->parent &&
> --
> 1.7.1
>
Hi,
Do you have any comment on this patch?

Regards,
Thang Q. Nguyen

\
 
 \ /
  Last update: 2017-07-04 05:38    [W:0.037 / U:5.572 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site