lkml.org 
[lkml]   [2017]   [Jul]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 3/3] can: m_can: Add PM Runtime
Date
Add support for PM Runtime which is the new way to handle managing clocks.
However, to avoid breaking SoCs not using PM_RUNTIME leave the old clk
management approach in place.

PM_RUNTIME is required by OMAP based devices to handle clock management.
Therefore, this allows future Texas Instruments SoCs that have the MCAN IP
to work with this driver.

Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
---
drivers/net/can/m_can/m_can.c | 13 +++++++++++++
1 file changed, 13 insertions(+)

diff --git a/drivers/net/can/m_can/m_can.c b/drivers/net/can/m_can/m_can.c
index ea48e59..93e23f5 100644
--- a/drivers/net/can/m_can/m_can.c
+++ b/drivers/net/can/m_can/m_can.c
@@ -23,6 +23,7 @@
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
#include <linux/iopoll.h>
#include <linux/can/dev.h>

@@ -633,11 +634,15 @@ static int m_can_clk_start(struct m_can_priv *priv)
if (err)
clk_disable_unprepare(priv->hclk);

+ pm_runtime_get_sync(priv->device);
+
return err;
}

static void m_can_clk_stop(struct m_can_priv *priv)
{
+ pm_runtime_put_sync(priv->device);
+
clk_disable_unprepare(priv->cclk);
clk_disable_unprepare(priv->hclk);
}
@@ -1582,6 +1587,8 @@ static int m_can_plat_probe(struct platform_device *pdev)
/* Enable clocks. Necessary to read Core Release in order to determine
* M_CAN version
*/
+ pm_runtime_enable(&pdev->dev);
+
ret = clk_prepare_enable(hclk);
if (ret)
goto disable_hclk_ret;
@@ -1626,6 +1633,8 @@ static int m_can_plat_probe(struct platform_device *pdev)
*/
tx_fifo_size = mram_config_vals[7];

+ pm_runtime_get_sync(&pdev->dev);
+
/* allocate the m_can device */
dev = alloc_m_can_dev(pdev, addr, tx_fifo_size);
if (!dev) {
@@ -1670,6 +1679,7 @@ static int m_can_plat_probe(struct platform_device *pdev)
disable_hclk_ret:
clk_disable_unprepare(hclk);
failed_ret:
+ pm_runtime_put_sync(&pdev->dev);
return ret;
}

@@ -1726,6 +1736,9 @@ static int m_can_plat_remove(struct platform_device *pdev)
struct net_device *dev = platform_get_drvdata(pdev);

unregister_m_can_dev(dev);
+
+ pm_runtime_disable(&pdev->dev);
+
platform_set_drvdata(pdev, NULL);

free_m_can_dev(dev);
--
2.10.0
\
 
 \ /
  Last update: 2017-07-25 00:53    [W:0.163 / U:0.476 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site