Messages in this thread |  | | Date | Mon, 24 Jul 2017 11:06:11 -0500 | From | Rob Herring <> | Subject | Re: [PATCH v6] MIPS: NI 169445 board support |
| |
On Tue, Jul 18, 2017 at 01:29:09PM -0500, Nathan Sullivan wrote: > Support the National Instruments 169445 board. > > Signed-off-by: Nathan Sullivan <nathan.sullivan@ni.com> > --- > Changes since v5: > > - make device tree addresses on the internal bus relative, and compile with > W=2 to be sure they are in the right format. > > Documentation/devicetree/bindings/mips/ni.txt | 7 ++ > MAINTAINERS | 8 ++ > arch/mips/boot/dts/Makefile | 1 + > arch/mips/boot/dts/ni/169445.dts | 100 ++++++++++++++++++++++++ > arch/mips/boot/dts/ni/Makefile | 7 ++ > arch/mips/configs/generic/board-ni169445.config | 27 +++++++ > arch/mips/generic/Kconfig | 6 ++ > arch/mips/generic/vmlinux.its.S | 25 ++++++ > 8 files changed, 181 insertions(+) > create mode 100644 Documentation/devicetree/bindings/mips/ni.txt > create mode 100644 arch/mips/boot/dts/ni/169445.dts > create mode 100644 arch/mips/boot/dts/ni/Makefile > create mode 100644 arch/mips/configs/generic/board-ni169445.config
Acked-by: Rob Herring <robh@kernel.org>
|  |