lkml.org 
[lkml]   [2017]   [Jun]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 4/6] dt-bindings: serial: Document RDA Micro UART
From
Date
Am 29.06.2017 um 22:10 schrieb Rob Herring:
> On Tue, Jun 27, 2017 at 02:55:18AM +0200, Andreas Färber wrote:
>> Add an initial binding for the RDA8810PL UART.
>>
>> Signed-off-by: Andreas Färber <afaerber@suse.de>
>> ---
>> Documentation/devicetree/bindings/serial/rda-uart.txt | 13 +++++++++++++
>> 1 file changed, 13 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/serial/rda-uart.txt
>>
>> diff --git a/Documentation/devicetree/bindings/serial/rda-uart.txt b/Documentation/devicetree/bindings/serial/rda-uart.txt
>> new file mode 100644
>> index 000000000000..6840a8aee035
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/serial/rda-uart.txt
>> @@ -0,0 +1,13 @@
>> +RDA Micro UART
>> +
>> +Required properties:
>> +- compatible : "rda,8810pl-uart" for RDA8810PL
>> +- reg : Offset and length of the register set for the device.
>
> No clocks or interrupts?

Not yet. I've only pieced together an earlycon driver so far, no full
serial driver. The .dtsi doesn't even have an interrupt-controller node
yet - wasn't clear to me whether this SoC even has a GIC and, if so,
where, from the downstream pre-DT code.

Regards,
Andreas

--
SUSE Linux GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Felix Imendörffer, Jane Smithard, Graham Norton
HRB 21284 (AG Nürnberg)

\
 
 \ /
  Last update: 2017-06-30 23:11    [W:0.364 / U:31.060 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site