[lkml]   [2017]   [Jun]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH v5 0/6] g_NCR5380: PDMA fixes and cleanup
Ondrej, would you please test this new series?

Changed since v1:
- PDMA transfer residual is calculated earlier.
- End of DMA flag check is now polled (if there is any residual).

Changed since v2:
- Bail out of transfer loops when Gated IRQ gets asserted.
- Make udelay conditional on board type.
- Drop sg_tablesize patch due to performance regression.

Changed since v3:
- Add Ondrej's workaround for corrupt WRITE commands on DTC boards.
- Reset the 53c400 logic after any short PDMA transfer.
- Don't fail the transfer if the 53c400 logic got a reset.

Changed since v4:
- Bail out of transfer loops when Gated IRQ gets asserted. (Again.)
- Always call wait_for_53c80_registers() at end of transfer.
- Drain chip buffers after PDMA receive is interrupted.
- Rework residual calculation.
- Add new patch to correct DMA terminology.

Finn Thain (2):
g_NCR5380: Cleanup comments and whitespace
g_NCR5380: Use unambiguous terminology for PDMA send and receive

Ondrej Zary (4):
g_NCR5380: Fix PDMA transfer size
g_NCR5380: End PDMA transfer correctly on target disconnection
g_NCR5380: Limit PDMA send to 512 B to avoid data corruption on
g_NCR5380: Re-work PDMA loops

drivers/scsi/g_NCR5380.c | 260 +++++++++++++++++++++++++----------------------
1 file changed, 139 insertions(+), 121 deletions(-)


 \ /
  Last update: 2017-06-29 07:26    [W:0.109 / U:0.644 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site