lkml.org 
[lkml]   [2017]   [Jun]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 5/8] dt-bindings: iio: Add STM32 LPTimer trigger binding
On Wed, Jun 21, 2017 at 04:30:12PM +0200, Fabrice Gasnier wrote:
> Add documentation for STMicroelectronics STM32 Low-Power Timer Trigger
> binding.
>
> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
> ---
> Changes in v2:
> - s/Low Power/Low-Power
> - remove leading 0x in example (parent node)
> - improve reg property description
> ---
> .../bindings/iio/timer/stm32-lptimer-trigger.txt | 23 ++++++++++++++++++++++
> 1 file changed, 23 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/iio/timer/stm32-lptimer-trigger.txt
>
> diff --git a/Documentation/devicetree/bindings/iio/timer/stm32-lptimer-trigger.txt b/Documentation/devicetree/bindings/iio/timer/stm32-lptimer-trigger.txt
> new file mode 100644
> index 0000000..466d99f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/timer/stm32-lptimer-trigger.txt
> @@ -0,0 +1,23 @@
> +STMicroelectronics STM32 Low-Power Timer Trigger
> +
> +STM32 Low-Power Timer provides trigger source (LPTIM output) that can be used
> +by STM32 internal ADC and/or DAC.
> +
> +Must be a sub-node of an STM32 Low-Power Timer device tree node.
> +See ../mfd/stm32-lptimer.txt for details about the parent node.
> +
> +Required properties:
> +- compatible: Must be "st,stm32-lptimer-trigger".
> +- reg: Selects trigger hardware block. Must be 0, 1 or 2
> + respectively for lptimer1, lptimer2 or lptimer3
> + trigger output.

I guess this answers my question. However, this seems like abuse of the
reg prop. This should not be how you select a trigger. The DT should
describe all the h/w blocks and then the adc connection is a separate
property.

Rob

\
 
 \ /
  Last update: 2017-06-26 20:14    [W:0.220 / U:0.552 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site