lkml.org 
[lkml]   [2017]   [May]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 18/18] arm64: dts: meson-gx-p23x-q20x: Fix node order
From
Date
On 05/13/2017 04:33 PM, Andreas Färber wrote:
> Sort nodes referenced by label alphabetically.
>
> Signed-off-by: Andreas Färber <afaerber@suse.de>
> ---
> v1 -> v2:
> * Rebased (new nodes added)
>
> .../arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi | 58 +++++++++++-----------
> 1 file changed, 29 insertions(+), 29 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi
> index 25eed18a7439..dc478d094c11 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi
> @@ -121,19 +121,42 @@
> };
> };
>
> -/* This UART is brought out to the DB9 connector */
> -&uart_AO {
> +&cvbs_vdac_port {
> + cvbs_vdac_out: endpoint {
> + remote-endpoint = <&cvbs_connector_in>;
> + };
> +};
> +
> +&ethmac {
> status = "okay";
> - pinctrl-0 = <&uart_ao_a_pins>;
> +};
> +
> +&hdmi_tx {
> + status = "okay";
> + pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
> pinctrl-names = "default";
> };
>
> +&hdmi_tx_tmds_port {
> + hdmi_tx_tmds_out: endpoint {
> + remote-endpoint = <&hdmi_connector_in>;
> + };
> +};
> +
> &ir {
> status = "okay";
> pinctrl-0 = <&remote_input_ao_pins>;
> pinctrl-names = "default";
> };
>
> +&pwm_ef {
> + status = "okay";
> + pinctrl-0 = <&pwm_e_pins>;
> + pinctrl-names = "default";
> + clocks = <&clkc CLKID_FCLK_DIV4>;
> + clock-names = "clkin0";
> +};
> +
> /* Wireless SDIO Module */
> &sd_emmc_a {
> status = "okay";
> @@ -198,32 +221,9 @@
> vqmmc-supply = <&vddio_boot>;
> };
>
> -&pwm_ef {
> - status = "okay";
> - pinctrl-0 = <&pwm_e_pins>;
> - pinctrl-names = "default";
> - clocks = <&clkc CLKID_FCLK_DIV4>;
> - clock-names = "clkin0";
> -};
> -
> -&ethmac {
> - status = "okay";
> -};
> -
> -&cvbs_vdac_port {
> - cvbs_vdac_out: endpoint {
> - remote-endpoint = <&cvbs_connector_in>;
> - };
> -};
> -
> -&hdmi_tx {
> +/* This UART is brought out to the DB9 connector */
> +&uart_AO {
> status = "okay";
> - pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
> + pinctrl-0 = <&uart_ao_a_pins>;
> pinctrl-names = "default";
> };
> -
> -&hdmi_tx_tmds_port {
> - hdmi_tx_tmds_out: endpoint {
> - remote-endpoint = <&hdmi_connector_in>;
> - };
> -};
>

Hi Andreas,

Like a previous attempt, I'm not OK with such rework since it will break bisect and add complexity for new patches handling.

The order is not alphabetically ordered, live with it.

Neil

\
 
 \ /
  Last update: 2017-05-15 10:17    [W:0.192 / U:0.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site