lkml.org 
[lkml]   [2017]   [May]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 17/18] arm64: dts: meson-gxm-nexbox-a1: Fix node order
Date
Sort nodes referenced by label alphabetically.

Signed-off-by: Andreas Färber <afaerber@suse.de>
---
v1 -> v2:
* Rebased (new nodes added)

.../arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts | 86 +++++++++++-----------
1 file changed, 43 insertions(+), 43 deletions(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts
index 920fac10de93..5f626d683088 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts
@@ -113,10 +113,49 @@
};
};

-&uart_AO {
+&cvbs_vdac_port {
+ cvbs_vdac_out: endpoint {
+ remote-endpoint = <&cvbs_connector_in>;
+ };
+};
+
+&ethmac {
status = "okay";
- pinctrl-0 = <&uart_ao_a_pins>;
+
+ pinctrl-0 = <&eth_pins>;
pinctrl-names = "default";
+
+ /* Select external PHY by default */
+ phy-handle = <&external_phy>;
+
+ amlogic,tx-delay-ns = <2>;
+
+ snps,reset-gpio = <&gpio GPIOZ_14 0>;
+ snps,reset-delays-us = <0 10000 1000000>;
+ snps,reset-active-low;
+
+ /* External PHY is in RGMII */
+ phy-mode = "rgmii";
+};
+
+&external_mdio {
+ external_phy: ethernet-phy@0 {
+ compatible = "ethernet-phy-id001c.c916", "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ max-speed = <1000>;
+ };
+};
+
+&hdmi_tx {
+ status = "okay";
+ pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+ pinctrl-names = "default";
+};
+
+&hdmi_tx_tmds_port {
+ hdmi_tx_tmds_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
};

&ir {
@@ -163,47 +202,8 @@
vqmmc-supply = <&vddio_boot>;
};

-&ethmac {
- status = "okay";
-
- pinctrl-0 = <&eth_pins>;
- pinctrl-names = "default";
-
- /* Select external PHY by default */
- phy-handle = <&external_phy>;
-
- amlogic,tx-delay-ns = <2>;
-
- snps,reset-gpio = <&gpio GPIOZ_14 0>;
- snps,reset-delays-us = <0 10000 1000000>;
- snps,reset-active-low;
-
- /* External PHY is in RGMII */
- phy-mode = "rgmii";
-};
-
-&external_mdio {
- external_phy: ethernet-phy@0 {
- compatible = "ethernet-phy-id001c.c916", "ethernet-phy-ieee802.3-c22";
- reg = <0>;
- max-speed = <1000>;
- };
-};
-
-&cvbs_vdac_port {
- cvbs_vdac_out: endpoint {
- remote-endpoint = <&cvbs_connector_in>;
- };
-};
-
-&hdmi_tx {
+&uart_AO {
status = "okay";
- pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+ pinctrl-0 = <&uart_ao_a_pins>;
pinctrl-names = "default";
};
-
-&hdmi_tx_tmds_port {
- hdmi_tx_tmds_out: endpoint {
- remote-endpoint = <&hdmi_connector_in>;
- };
-};
--
2.12.0
\
 
 \ /
  Last update: 2017-05-13 16:35    [W:0.190 / U:1.964 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site