lkml.org 
[lkml]   [2017]   [Apr]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v5] dt-bindings: fpga: Add bindings document for Xilinx LogiCore PR Decoupler
Date
This adds the binding documentation for the Xilinx LogiCORE PR
Decoupler soft core.

Signed-off-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Alan Tull <atull@kernel.org>
Cc: Sören Brinkmann <soren.brinkmann@xilinx.com>
Cc: linux-kernel@vger.kernel.org
Cc: devicetree@vger.kernel.org
---

Changes from v4:
- Ssubject line
- Replaced 'or' by 'followed by' as suggested by Rob

Changes from v3:
- Addressed Michal's comments
- Addressed Alan's Comments
- Added Alan's Acked-by

Changes from v2:
- Added refence to generic fpga-region bindings
- Fixed up reg property in example
- Added fallback to "xlnx,pr-decoupler" without version

Changes from v1:
- Added clock names & clock to example
- Merged some of the description from Michal's version

---
.../bindings/fpga/xilinx-pr-decoupler.txt | 36 ++++++++++++++++++++++
1 file changed, 36 insertions(+)
create mode 100644 Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt

diff --git a/Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt b/Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt
new file mode 100644
index 0000000..b2c58fb
--- /dev/null
+++ b/Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt
@@ -0,0 +1,36 @@
+Xilinx LogiCORE Partial Reconfig Decoupler Softcore
+
+The Xilinx LogiCORE Partial Reconfig Decoupler manages one or more
+decouplers / fpga bridges.
+The controller can decouple/disable the bridges which prevents signal
+changes from passing through the bridge. The controller can also
+couple / enable the bridges which allows traffic to pass through the
+bridge normally.
+
+The Driver supports only MMIO handling. A PR region can have multiple
+PR Decouplers which can be handled independently or chained via decouple/
+decouple_status signals.
+
+Required properties:
+- compatible : Should contain "xlnx,pr-decoupler-1.00" followed by
+ "xlnx,pr-decoupler"
+- regs : base address and size for decoupler module
+- clocks : input clock to IP
+- clock-names : should contain "aclk"
+
+Optional properties:
+- bridge-enable : 0 if driver should disable bridge at startup
+ 1 if driver should enable bridge at startup
+ Default is to leave bridge in current state.
+
+See Documentation/devicetree/bindings/fpga/fpga-region.txt for generic bindings.
+
+Example:
+ fpga-bridge@100000450 {
+ compatible = "xlnx,pr-decoupler-1.00",
+ "xlnx-pr-decoupler";
+ regs = <0x10000045 0x10>;
+ clocks = <&clkc 15>;
+ clock-names = "aclk";
+ bridge-enable = <0>;
+ };
--
2.7.4
\
 
 \ /
  Last update: 2017-04-09 19:11    [W:0.037 / U:0.504 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site