lkml.org 
[lkml]   [2017]   [Apr]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH v4 0/9] Renesas RZ/A1 pin and gpio controller
Date
Hi Jacopo,

On Wednesday, April 05, 2017, Jacopo Mondi wrote:
> v3 -> v4:
> - use "pinmux" property in pmx sub-nodes in place of "renesas,pins"
> - use pinconf standard properties to set pin mux additional flags
> - add "bi-directional" and "output-enable" to pinconf generic properties
> - perform pmx function parsing at dt_node_to_map() time
> - change DT bindings to use GENERIC_PINCONF
> - change DT bindings to allow sub-nodes to have "pinmux" property
> specified
> - several renames (register names, DT parse functions, set_mux() function)


I just tested this driver on the RZ/A1 RSK board.
The following worked good.

SCIF2, I2C, SDHI, Ethernet


SDHI also has bi-direction pins. For your reference, here was my DT:


/* SHDI ch1 on CN1 */
sdhi1_pins: sdhi1 {
pins {
pinmux = <RZA1_PINMUX(3, 8, 7)>, /* SD_CD_1 */
<RZA1_PINMUX(3, 9, 7)>, /* SD_WP_1 */
<RZA1_PINMUX(3, 12, 7)>, /* SD_CLK_1 */
<RZA1_PINMUX(3, 13, 7)>; /* SD_CMD_1 */
};

pins_bidir {
pinmux = <RZA1_PINMUX(3, 10, 7)>, /* SD_D1_1 */
<RZA1_PINMUX(3, 11, 7)>, /* SD_D0_1 */
<RZA1_PINMUX(3, 14, 7)>, /* SD_D3_1 */
<RZA1_PINMUX(3, 15, 7)>; /* SD_D2_1 */
bi-directional;
};
};


Thanks,
Chris

\
 
 \ /
  Last update: 2017-04-10 04:34    [W:0.118 / U:1.260 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site