[lkml]   [2017]   [Apr]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH v2 0/2] drivers: serial: Aspeed VUART driver
This is v2 of a driver for the Aspeed VUART. This version addresses feedback
from Andy and Greg, and adds Rob's ack for the bindings change.

The VUART is a serial device on the BMC side of the LPC bus that connects a BMC
to it's host processor.

We add a flag to the serial core to allow the driver to skip probing of the
THRE irq behaviour, which could hang due to the host not reading bytes out of
the buffer.

We've been using this on systems for over a year, so it has seen a good amount
of testing.



Jeremy Kerr (1):
drivers/serial: Add driver for Aspeed virtual UART

Joel Stanley (1):
serial: 8250: Add flag so drivers can avoid THRE probe

Documentation/ABI/stable/sysfs-driver-aspeed-vuart | 15 +
Documentation/devicetree/bindings/serial/8250.txt | 2 +
drivers/tty/serial/8250/8250_port.c | 2 +-
drivers/tty/serial/8250/Kconfig | 10 +
drivers/tty/serial/8250/Makefile | 1 +
drivers/tty/serial/8250/aspeed-vuart.c | 341 +++++++++++++++++++++
include/linux/serial_core.h | 1 +
7 files changed, 371 insertions(+), 1 deletion(-)
create mode 100644 Documentation/ABI/stable/sysfs-driver-aspeed-vuart
create mode 100644 drivers/tty/serial/8250/aspeed-vuart.c


 \ /
  Last update: 2017-04-05 06:05    [W:0.058 / U:1.680 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site