[lkml]   [2017]   [Feb]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Patch in this message
Subject[PATCH - REGRESSION] mwifiex: don't enable/disable IRQ 0 during suspend/resume
If we don't have an out-of-band wakeup IRQ configured through DT (as
most platforms don't), then we fall out of this function with
'irq_wakeup == 0'. Other code (e.g., mwifiex_disable_wake() and
mwifiex_enable_wake()) treats 'irq_wakeup >= 0' as a valid IRQ, and so
we end up calling {enable,disable}_irq() on IRQ 0.

That seems bad, so let's not do that.

Same problem as fixed in this patch:
[PATCH v2 2/3] btmrvl: set irq_bt to -1 when failed to parse it

with the difference that:
(a) this one is actually a regression and
(b) this affects both device tree and non-device-tree systems

While fixing the regression, also drop the verbosity on the parse
failure, so we don't see this when a DT node is present but doesn't have
an interrupt property (this is perfectly legal):

[ 21.999000] mwifiex_pcie 0000:01:00.0: fail to parse irq_wakeup from device tree

Fixes: 853402a00823 ("mwifiex: Enable WoWLAN for both sdio and pcie")
Signed-off-by: Brian Norris <>
This is a 4.10 regression. Not sure if it's critical to push quickly, or if it
should just be tagged -stable and pushed in 4.11.

drivers/net/wireless/marvell/mwifiex/main.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/marvell/mwifiex/main.c b/drivers/net/wireless/marvell/mwifiex/main.c
index e5c3a8aa3929..c246d8efb6fc 100644
--- a/drivers/net/wireless/marvell/mwifiex/main.c
+++ b/drivers/net/wireless/marvell/mwifiex/main.c
@@ -1569,13 +1569,13 @@ static void mwifiex_probe_of(struct mwifiex_adapter *adapter)
struct device *dev = adapter->dev;

if (!dev->of_node)
- return;
+ goto err_exit;

adapter->dt_node = dev->of_node;
adapter->irq_wakeup = irq_of_parse_and_map(adapter->dt_node, 0);
if (!adapter->irq_wakeup) {
- dev_info(dev, "fail to parse irq_wakeup from device tree\n");
- return;
+ dev_dbg(dev, "fail to parse irq_wakeup from device tree\n");
+ goto err_exit;

ret = devm_request_irq(dev, adapter->irq_wakeup,
@@ -1595,7 +1595,7 @@ static void mwifiex_probe_of(struct mwifiex_adapter *adapter)

- adapter->irq_wakeup = 0;
+ adapter->irq_wakeup = -1;

 \ /
  Last update: 2017-02-10 22:57    [W:0.069 / U:0.476 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site