lkml.org 
[lkml]   [2017]   [Feb]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH 10/10] ARM: davinci: add pdata-quirks for da850-evm vpif display
Date
Hi Bartosz,

Bartosz Golaszewski <bgolaszewski@baylibre.com> writes:

> Similarly to vpif capture: we need to register the vpif display driver
> and the corresponding adv7343 encoder in pdata-quirks as the DT
> support is not complete.
>
> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> ---
> arch/arm/mach-davinci/pdata-quirks.c | 86 +++++++++++++++++++++++++++++++++++-
> 1 file changed, 85 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/mach-davinci/pdata-quirks.c b/arch/arm/mach-davinci/pdata-quirks.c
> index 09f62ac..0a55546 100644
> --- a/arch/arm/mach-davinci/pdata-quirks.c
> +++ b/arch/arm/mach-davinci/pdata-quirks.c
> @@ -9,13 +9,17 @@
> */
> #include <linux/kernel.h>
> #include <linux/of_platform.h>
> +#include <linux/gpio.h>
>
> #include <media/i2c/tvp514x.h>
> +#include <media/i2c/adv7343.h>
>
> #include <mach/common.h>
> #include <mach/da8xx.h>
> #include <mach/mux.h>
>
> +#define DA850_EVM_UI_EXP_SEL_VPIF_DISP 5
> +
> struct pdata_init {
> const char *compatible;
> void (*fn)(void);
> @@ -107,7 +111,78 @@ static struct vpif_capture_config da850_vpif_capture_config = {
> },
> .card_name = "DA850/OMAP-L138 Video Capture",
> };
> +#endif /* IS_ENABLED(CONFIG_VIDEO_DAVINCI_VPIF_CAPTURE) */
> +
> +#if defined(CONFIG_DA850_UI_SD_VIDEO_PORT)
> +static void vpif_evm_display_setup(void)
> +{
> + int gpio = DAVINCI_N_GPIO + DA850_EVM_UI_EXP_SEL_VPIF_DISP, ret;
> +
> + ret = gpio_request(gpio, "sel_c");
> + if (ret) {
> + pr_warn("Cannot open UI expander pin %d\n", gpio);
> + return;
> + }
> +
> + gpio_direction_output(gpio, 0);
> +}

I had a closer look at the UI board schematic, and it looks like the
SEL_C line of the GPIO exapander is actualy to select the VPIF *input*
source, not output, so I don't think it should be needed in this patch.

Can you test VPIF display works without calling this function?

Kevin

\
 
 \ /
  Last update: 2017-02-10 20:41    [W:0.272 / U:0.152 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site