lkml.org 
[lkml]   [2017]   [Dec]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 0/4] Add support for muxing individual pins
* Charles Keepax <ckeepax@opensource.cirrus.com> [171208 14:31]:
> From the implementation so far the pinctrl-single stuff appears to
> target systems where there isn't really a concept of groups. Each
> pin is just a completely separate entry and you can only configure
> things one pin at a time. In that case it almost makes more sense
> to model each pin as an individual group such that it is clearly
> distinct from the others.

Maybe check again or else I don't follow you :)

The pinctrl groups are created dynamically with pinctrl-single
based on how the pins are grouped in the dts file:

mmc1_pins: pinmux_mmc1_pins {
pinctrl-single,pins = <
OMAP4_IOPAD(0x0e2, PIN_INPUT_PULLUP | MUX_MODE0)
OMAP4_IOPAD(0x0e4, PIN_INPUT_PULLUP | MUX_MODE0)
OMAP4_IOPAD(0x0e6, PIN_INPUT_PULLUP | MUX_MODE0)
OMAP4_IOPAD(0x0e8, PIN_INPUT_PULLUP | MUX_MODE0)
OMAP4_IOPAD(0x0ea, PIN_INPUT_PULLUP | MUX_MODE0)
OMAP4_IOPAD(0x0ec, PIN_INPUT_PULLUP | MUX_MODE0)
>;
};

Then on a booted system we have the following under
/sys/kernel/debug/pinctrl/4a100040.pinmux/pingroups:

group: pinmux_mmc1_pins
pin 81 (PIN81)
pin 82 (PIN82)
pin 83 (PIN83)
pin 84 (PIN84)
pin 85 (PIN85)
pin 86 (PIN86)

Regards,

Tony

\
 
 \ /
  Last update: 2017-12-08 17:29    [W:0.081 / U:2.784 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site