[lkml]   [2017]   [Dec]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: polarity inversion on LS1021a
Hi Rasmus,

On Monday, December 4, 2017, 4:11:06 PM CET Rasmus Villemoes wrote:
> The LS1021A has a standard GIC-400, but allows inverting the polarity of
> six external interrupt lines via a certain register, effectively
> supporting IRQ_TYPE_LEVEL_LOW and IRQ_TYPE_EDGE_FALLING for those.
> I'm trying to figure out how one would add support for this. The patch
> below works but is obviously just meant to help show what I mean, so
> please don't comment on all the things that are wrong with it.
> It feels wrong to create a whole new irqchip driver copy-pasting the
> entire irg-gic.c, but I can't figure out how and where one could hook
> into the existing one. Any pointers on how to do this properly will be
> greatly appreciated.

In my opinion a new irqchip is still required, but solely for modifying
SCFG_INTPCR depending on IRQ_TYPE_*
You would need to insert it as a cascading interrupt chip in device tree.
You also need to protect accesses to this register using a spinlock.
This is at least my idea how I would have done it, though never got time
for it.

Best regards,

 \ /
  Last update: 2017-12-04 16:32    [W:0.146 / U:3.212 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site