Messages in this thread |  | | Date | Thu, 21 Dec 2017 16:29:44 +0800 | From | Shawn Guo <> | Subject | Re: [PATCH v3 1/9] ARM: dts: imx7-colibri: move and rename USB Host power regulator |
| |
On Tue, Dec 19, 2017 at 07:10:30PM +0100, Stefan Agner wrote: > The Colibri default which enables USB Host power is not necessarily > tied to the OTG2 controller, some carrier board use the pin to > control USB power for both controllers. Hence name the pinctrl > group more generic. > > Also move the regulator to the generic eval-v3 device tree since > the regulator is always on the carrier board. In the Colibri iMX7S > case the regulator is just not used. This allows to reuse the > regulator in a upcoming SKU Colibri iMX7D 1GB with eMMC. > > Signed-off-by: Stefan Agner <stefan@agner.ch> > Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Applied all, thanks.
|  |