lkml.org 
[lkml]   [2017]   [Dec]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 2/2] dt/bindings: Add bindings for Layerscape external irqs
On Wed, Dec 20, 2017 at 09:30:30AM +0100, Rasmus Villemoes wrote:
> Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
> ---
> .../interrupt-controller/fsl,ls-extirq.txt | 37 ++++++++++++++++++++++
> 1 file changed, 37 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.txt
>
> diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.txt b/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.txt
> new file mode 100644
> index 000000000000..7e4680866364
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.txt
> @@ -0,0 +1,37 @@
> +* Freescale Layerscape external IRQs
> +
> +Some Layerscape SOCs (LS1021A, LS1043A, LS1046A) support inverting
> +the polarity of certain external interrupt lines.
> +
> +Required properties:
> +- compatible: should be "fsl,<soc-name>-extirq", e.g. "fsl,ls1021a-extirq".
> +- interrupt-controller: Identifies the node as an interrupt controller
> +- #interrupt-cells: Use the same format as specified by GIC in arm,gic.txt.
> +- interrupt-parent: phandle of GIC.
> +- syscon: phandle of Supplemental Configuration Unit (scfg) and offset
> + to the INTPCR register.
> +- interrupts: Specifies the mapping to interrupt numbers in the parent
> + interrupt controller. Interrupts are mapped one-to-one to parent
> + interrupts.
> +
> +Optional properties:
> +- bit-reverse: This boolean property should be set on the LS1021A if

fsl,bit-reverse

> + the SCFGREVCR register has been set to all-ones (which is usually
> + the case), meaning that all reads and writes of SCFG registers are
> + implicitly bit-reversed. Other compatible platforms do not have such
> + a register.
> +
> +Example:
> + extirq: extirq {

Node name should still be "interrupt-controller".

> + compatible = "fsl,ls1021a-extirq";
> + #interrupt-cells = <3>;
> + interrupt-controller;
> + interrupt-parent = <&gic>;
> + syscon = <&scfg 0x1ac>;
> + interrupts = <163 164 165 167 168 169>;
> + bit-reverse;
> + };
> +
> +
> + interrupts-extended = <&gic GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
> + <&extirq GIC_SPI 1 IRQ_TYPE_LEVEL_LOW>;
> --
> 2.7.4
>

\
 
 \ /
  Last update: 2017-12-21 23:44    [W:0.104 / U:0.788 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site