lkml.org 
[lkml]   [2017]   [Dec]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 2/2] dt/bindings: Add bindings for Layerscape external irqs
Date
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
---
.../interrupt-controller/fsl,ls-extirq.txt | 37 ++++++++++++++++++++++
1 file changed, 37 insertions(+)
create mode 100644 Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.txt

diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.txt b/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.txt
new file mode 100644
index 000000000000..7e4680866364
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.txt
@@ -0,0 +1,37 @@
+* Freescale Layerscape external IRQs
+
+Some Layerscape SOCs (LS1021A, LS1043A, LS1046A) support inverting
+the polarity of certain external interrupt lines.
+
+Required properties:
+- compatible: should be "fsl,<soc-name>-extirq", e.g. "fsl,ls1021a-extirq".
+- interrupt-controller: Identifies the node as an interrupt controller
+- #interrupt-cells: Use the same format as specified by GIC in arm,gic.txt.
+- interrupt-parent: phandle of GIC.
+- syscon: phandle of Supplemental Configuration Unit (scfg) and offset
+ to the INTPCR register.
+- interrupts: Specifies the mapping to interrupt numbers in the parent
+ interrupt controller. Interrupts are mapped one-to-one to parent
+ interrupts.
+
+Optional properties:
+- bit-reverse: This boolean property should be set on the LS1021A if
+ the SCFGREVCR register has been set to all-ones (which is usually
+ the case), meaning that all reads and writes of SCFG registers are
+ implicitly bit-reversed. Other compatible platforms do not have such
+ a register.
+
+Example:
+ extirq: extirq {
+ compatible = "fsl,ls1021a-extirq";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ interrupt-parent = <&gic>;
+ syscon = <&scfg 0x1ac>;
+ interrupts = <163 164 165 167 168 169>;
+ bit-reverse;
+ };
+
+
+ interrupts-extended = <&gic GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+ <&extirq GIC_SPI 1 IRQ_TYPE_LEVEL_LOW>;
--
2.7.4
\
 
 \ /
  Last update: 2017-12-20 09:31    [W:0.226 / U:5.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site