lkml.org 
[lkml]   [2017]   [Dec]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/1] tpm: only attempt to disable the LPC CLKRUN if is already
Hi Javier,

I love your patch! Yet something to improve:

[auto build test ERROR on next-20171214]
[cannot apply to char-misc/char-misc-testing v4.15-rc3 v4.15-rc2 v4.15-rc1 v4.15-rc4]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]

url: https://github.com/0day-ci/linux/commits/Javier-Martinez-Canillas/tpm-only-attempt-to-disable-the-LPC-CLKRUN-if-is-already/20171220-041605
config: x86_64-randconfig-x007-201751 (attached as .config)
compiler: gcc-7 (Debian 7.2.0-12) 7.2.1 20171025
reproduce:
# save the attached .config to linux build tree
make ARCH=x86_64

All errors (new ones prefixed by >>):

drivers/char/tpm/tpm_tis_core.c: In function 'tpm_tis_core_init':
>> drivers/char/tpm/tpm_tis_core.c:836:26: error: assignment of member 'clk_enable' in read-only object
chip->ops->clk_enable = NULL;
^

vim +/clk_enable +836 drivers/char/tpm/tpm_tis_core.c

815
816 /* Maximum timeouts */
817 chip->timeout_a = msecs_to_jiffies(TIS_TIMEOUT_A_MAX);
818 chip->timeout_b = msecs_to_jiffies(TIS_TIMEOUT_B_MAX);
819 chip->timeout_c = msecs_to_jiffies(TIS_TIMEOUT_C_MAX);
820 chip->timeout_d = msecs_to_jiffies(TIS_TIMEOUT_D_MAX);
821 priv->phy_ops = phy_ops;
822 dev_set_drvdata(&chip->dev, priv);
823
824 if (is_bsw()) {
825 priv->ilb_base_addr = ioremap(INTEL_LEGACY_BLK_BASE_ADDR,
826 ILB_REMAP_SIZE);
827 if (!priv->ilb_base_addr)
828 return -ENOMEM;
829
830 clkrun_val = ioread32(priv->ilb_base_addr + LPC_CNTRL_OFFSET);
831 /* Check if CLKRUN# is already not enabled in the LPC bus */
832 if (!(clkrun_val & LPC_CLKRUN_EN)) {
833 priv->flags |= TPM_TIS_CLK_ENABLE;
834 iounmap(priv->ilb_base_addr);
835 priv->ilb_base_addr = NULL;
> 836 chip->ops->clk_enable = NULL;
837 }
838 }
839
840 if (chip->ops->clk_enable != NULL)
841 chip->ops->clk_enable(chip, true);
842
843 if (wait_startup(chip, 0) != 0) {
844 rc = -ENODEV;
845 goto out_err;
846 }
847
848 /* Take control of the TPM's interrupt hardware and shut it off */
849 rc = tpm_tis_read32(priv, TPM_INT_ENABLE(priv->locality), &intmask);
850 if (rc < 0)
851 goto out_err;
852
853 intmask |= TPM_INTF_CMD_READY_INT | TPM_INTF_LOCALITY_CHANGE_INT |
854 TPM_INTF_DATA_AVAIL_INT | TPM_INTF_STS_VALID_INT;
855 intmask &= ~TPM_GLOBAL_INT_ENABLE;
856 tpm_tis_write32(priv, TPM_INT_ENABLE(priv->locality), intmask);
857
858 rc = tpm2_probe(chip);
859 if (rc)
860 goto out_err;
861
862 rc = tpm_tis_read32(priv, TPM_DID_VID(0), &vendor);
863 if (rc < 0)
864 goto out_err;
865
866 priv->manufacturer_id = vendor;
867
868 rc = tpm_tis_read8(priv, TPM_RID(0), &rid);
869 if (rc < 0)
870 goto out_err;
871
872 dev_info(dev, "%s TPM (device-id 0x%X, rev-id %d)\n",
873 (chip->flags & TPM_CHIP_FLAG_TPM2) ? "2.0" : "1.2",
874 vendor >> 16, rid);
875
876 probe = probe_itpm(chip);
877 if (probe < 0) {
878 rc = -ENODEV;
879 goto out_err;
880 }
881
882 /* Figure out the capabilities */
883 rc = tpm_tis_read32(priv, TPM_INTF_CAPS(priv->locality), &intfcaps);
884 if (rc < 0)
885 goto out_err;
886
887 dev_dbg(dev, "TPM interface capabilities (0x%x):\n",
888 intfcaps);
889 if (intfcaps & TPM_INTF_BURST_COUNT_STATIC)
890 dev_dbg(dev, "\tBurst Count Static\n");
891 if (intfcaps & TPM_INTF_CMD_READY_INT)
892 dev_dbg(dev, "\tCommand Ready Int Support\n");
893 if (intfcaps & TPM_INTF_INT_EDGE_FALLING)
894 dev_dbg(dev, "\tInterrupt Edge Falling\n");
895 if (intfcaps & TPM_INTF_INT_EDGE_RISING)
896 dev_dbg(dev, "\tInterrupt Edge Rising\n");
897 if (intfcaps & TPM_INTF_INT_LEVEL_LOW)
898 dev_dbg(dev, "\tInterrupt Level Low\n");
899 if (intfcaps & TPM_INTF_INT_LEVEL_HIGH)
900 dev_dbg(dev, "\tInterrupt Level High\n");
901 if (intfcaps & TPM_INTF_LOCALITY_CHANGE_INT)
902 dev_dbg(dev, "\tLocality Change Int Support\n");
903 if (intfcaps & TPM_INTF_STS_VALID_INT)
904 dev_dbg(dev, "\tSts Valid Int Support\n");
905 if (intfcaps & TPM_INTF_DATA_AVAIL_INT)
906 dev_dbg(dev, "\tData Avail Int Support\n");
907
908 /* INTERRUPT Setup */
909 init_waitqueue_head(&priv->read_queue);
910 init_waitqueue_head(&priv->int_queue);
911 if (irq != -1) {
912 /* Before doing irq testing issue a command to the TPM in polling mode
913 * to make sure it works. May as well use that command to set the
914 * proper timeouts for the driver.
915 */
916 if (tpm_get_timeouts(chip)) {
917 dev_err(dev, "Could not get TPM timeouts and durations\n");
918 rc = -ENODEV;
919 goto out_err;
920 }
921
922 if (irq) {
923 tpm_tis_probe_irq_single(chip, intmask, IRQF_SHARED,
924 irq);
925 if (!(chip->flags & TPM_CHIP_FLAG_IRQ))
926 dev_err(&chip->dev, FW_BUG
927 "TPM interrupt not working, polling instead\n");
928 } else {
929 tpm_tis_probe_irq(chip, intmask);
930 }
931 }
932
933 rc = tpm_chip_register(chip);
934 if (rc && is_bsw() && priv->ilb_base_addr)
935 iounmap(priv->ilb_base_addr);
936
937 if (chip->ops->clk_enable != NULL)
938 chip->ops->clk_enable(chip, false);
939
940 return rc;
941 out_err:
942 tpm_tis_remove(chip);
943 if (is_bsw())
944 iounmap(priv->ilb_base_addr);
945
946 if (chip->ops->clk_enable != NULL)
947 chip->ops->clk_enable(chip, false);
948
949 return rc;
950 }
951 EXPORT_SYMBOL_GPL(tpm_tis_core_init);
952

---
0-DAY kernel test infrastructure Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all Intel Corporation
[unhandled content-type:application/gzip]
\
 
 \ /
  Last update: 2017-12-19 22:10    [W:0.250 / U:2.524 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site