lkml.org 
[lkml]   [2017]   [Dec]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3] tty: serial: meson: allow baud-rates lower than 9600
On Sat, Nov 04, 2017 at 01:36:07PM +0100, Thomas Rohloff wrote:
> Devices like DCF77 receivers need the baud-rate to be as low as 50.
>
> I have tested this on a Meson GXL device with uart_A.
>
> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Cc: Jiri Slaby <jslaby@suse.com>
> Cc: Carlo Caione <carlo@caione.org>
> Cc: Kevin Hilman <khilman@baylibre.com>
> Cc: linux-amlogic@lists.infradead.org
> Cc: linux-arm-kernel@lists.infradead.org
> Cc: linux-kernel@vger.kernel.org
> Signed-off-by: Thomas Rohloff <v10lator@myway.de>
> ---
> drivers/tty/serial/meson_uart.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/tty/serial/meson_uart.c
> b/drivers/tty/serial/meson_uart.c
> index 07c0f98be3ac..e281ce5d101d 100644
> --- a/drivers/tty/serial/meson_uart.c
> +++ b/drivers/tty/serial/meson_uart.c
> @@ -362,7 +362,7 @@ static void meson_uart_set_termios(struct uart_port
> *port,
>
> writel(val, port->membase + AML_UART_CONTROL);
>
> - baud = uart_get_baud_rate(port, termios, old, 9600, 4000000);
> + baud = uart_get_baud_rate(port, termios, old, 50, 4000000);
> meson_uart_change_speed(port, baud);
>
> port->read_status_mask = AML_UART_TX_FIFO_WERR;

This patch is corrupted (line-wrapped), and can not be applied. Please
fix up and resend.

thanks,

greg k-h

\
 
 \ /
  Last update: 2017-12-19 09:57    [W:0.064 / U:0.824 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site