[lkml]   [2017]   [Dec]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH 1/2] dt-bindings: at24: new optional property - write-protect-gpios
On Tue, Dec 19, 2017 at 6:14 PM, Bartosz Golaszewski <> wrote:
> AT24 EEPROMs have a write-protect pin, which - when pulled high -
> inhibits writes to the upper quadrant of memory (although it has been
> observed that on some chips it disables writing to the entire memory
> range).
> On some boards, this pin is connected to a GPIO and pulled high by
> default, which forces the user to manually change its state before
> writing. On linux this means that we either need to hog the line all
> the time, or set the GPIO value before writing from outside of the
> at24 driver.
> Add a new optional property to the device tree binding document, which
> allows to specify the GPIO line to which the write-protect pin is
> connected.

> + - write-protect-gpios: GPIO to which the write-protect pin of the chip is

The rule of thumb is to check what is de facto state of the properties
like this, i.e.

% git grep -n wp-gpio -- Documentation/ | wc -l
% git grep -n write-protect-gpio -- Documentation/ | wc -l

I think it means something.

With Best Regards,
Andy Shevchenko

 \ /
  Last update: 2017-12-19 23:25    [W:0.039 / U:3.288 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site