lkml.org 
[lkml]   [2017]   [Dec]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 5/5] arm: dts: sun8i: a83t: bananapi-m3: Enable IR controller
On Mon, Dec 18, 2017 at 6:45 AM, Philipp Rossak <embed3d@gmail.com> wrote:
> The Bananapi M3 has an onboard IR receiver.
> This enables the onboard IR receiver subnode.
> Other than the other IR receivers this one needs a base clock frequency

Unlike the other...

> of 3000000 Hz (3 MHz), to be able to work.
>
> Signed-off-by: Philipp Rossak <embed3d@gmail.com>
> ---
> arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts | 7 +++++++
> 1 file changed, 7 insertions(+)
>
> diff --git a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
> index 6550bf0e594b..2bf25ca64133 100644
> --- a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
> +++ b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
> @@ -100,6 +100,13 @@
> status = "okay";
> };
>
> +&ir {

See my other reply about the name.

Otherwise,

Acked-by: Chen-Yu Tsai <wens@csie.org>

> + pinctrl-names = "default";
> + pinctrl-0 = <&ir_pins_a>;
> + clock-frequency = <3000000>;
> + status = "okay";
> +};
> +
> &mdio {
> rgmii_phy: ethernet-phy@1 {
> compatible = "ethernet-phy-ieee802.3-c22";
> --
> 2.11.0
>

\
 
 \ /
  Last update: 2017-12-18 04:31    [W:0.066 / U:1.836 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site