lkml.org 
[lkml]   [2017]   [Dec]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2] ARM: dts: add reset property for rk3066a-rayeager emac phy
From
Date
Hi Heiko

Thanks :)


On 2017年12月17日 04:11, Heiko Stuebner wrote:
> Hi Chris,
>
> Am Mittwoch, 8. November 2017, 17:50:41 CET schrieb Chris Zhong:
>> The ethernet phy of rk3066a-rayeager has a reset pin, it controlled by
>> GPIO1_D6, this pin should be pull down then pull up to reset the phy.
>> Add a reset-gpios property in phy0, make the phy can be reset when emac
>> power on.
>>
>> Signed-off-by: Chris Zhong <zyw@rock-chips.com>
>> ---
>>
>> Changes in v2:
>> use a generic property for reset, and this patch follow these 2 pathes
>> from Geert Uytterhoeven <geert+renesas@glider.be>
>> http://patchwork.ozlabs.org/patch/828499/
>> http://patchwork.ozlabs.org/patch/828505/
> looks like the phylib-patches were accepted some days ago,
> so I've now also applied this patch for 4.16, after fixing the subject
> by adding the "rockchip:" to "ARM: dts: rockchip": :-)
>
>
> Heiko
>
>
>

--
Chris Zhong


\
 
 \ /
  Last update: 2017-12-18 01:49    [W:0.046 / U:3.268 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site