lkml.org 
[lkml]   [2017]   [Dec]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5/5] arm: dts: sun8i: a83t: bananapi-m3: Enable IR controller
Date
The Bananapi M3 has an onboard IR receiver.
This enables the onboard IR receiver subnode.
Other than the other IR receivers this one needs a base clock frequency
of 3000000 Hz (3 MHz), to be able to work.

Signed-off-by: Philipp Rossak <embed3d@gmail.com>
---
arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts | 7 +++++++
1 file changed, 7 insertions(+)

diff --git a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
index 6550bf0e594b..2bf25ca64133 100644
--- a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
+++ b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
@@ -100,6 +100,13 @@
status = "okay";
};

+&ir {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ir_pins_a>;
+ clock-frequency = <3000000>;
+ status = "okay";
+};
+
&mdio {
rgmii_phy: ethernet-phy@1 {
compatible = "ethernet-phy-ieee802.3-c22";
--
2.11.0
\
 
 \ /
  Last update: 2017-12-17 23:47    [W:0.075 / U:14.808 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site